Search results for 'MAGPUL 10/20'
-
Pmag Ranger Plate .223 Black
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$7.95 -
Pmag Ranger Plate .223 FDE
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$7.95 -
Pmag Ranger Plate .223 OD
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Pmag Ranger Plate .223 Foliage
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Magpul Ranger Plate 223
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG.
The ranger plate incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Made in U.S.A.
$5.95 -
Magpul Enhanced Self-leveling Follower USGI .223 - Yellow
The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the current issue aluminum USGI 30-round magazine follower.
Featuring a patent pending 4-way anti-tilt design, the Enhanced Self-Leveling Follower is made from a non-hydroscopic and self-lubricating polymer.
Made in U.S.A.
$2.39 -
Magpul D50 10/50 Magblock (7.62x51)
Magblock 10/50 MCL (Magazine Capacity Limiter) for Magpul 50 round D50 Drum in 7.62x51.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions.$14.95 -
PMAG AK47 10/30 Magblock (7.62)
Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)
This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.
- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 5 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else.*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size.
Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount. See our upgrade springs here: LINK$7.49 As low as: $5.95 -
PMAG AK-74 Magblock Limiter (5.45)
Magblock 10 Round Limiter for Magpul 30 Round AK-74 Pmag (5.45x39mm)
- This block fits the new Magpul 30 round AK74 magazines and will convert them to hold 10 rounds.
- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Made of super strong heat resistant polymer.
$7.49 As low as: $5.95 -
Gen 3 Pmag 10/40 Magblock
10 Round Limiter for Gen M3 40 Round Pmags
Magblock 10/40 MCL (Magazine Capacity Limiter) for Magpul 40 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 40 round magazine to hold only 10 rounds.
- Includes 2 part limiter for extra height.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- Compatible with the 40 round Magpul Gen 3 Pmags only.
$7.49 As low as: $5.95 -
Sale
Steyr Aug PMag 10/30 Magblock Limiter
Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Steyr Aug Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
Regular Price: $5.95
Special Price $4.95
-
GEN M3 PMAG 10/30 (RETAIL 3 PACK)
Gen M3 Magpul PMag 10/30 limiter 3 Pack Kit
Save time and money by making your magazines legal.
- This Magblock fits the Gen3/M3 Magpul 30-round Pmags.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for Gen3 20-round and 10-round magazines.
-Magazines can be loaded with the bolt closed.
$15.95 -
GEN M2 PMAG 10/30 (RETAIL 3 PACK)
Gen M2 Magpul PMag 10/30 limiter 3 Pack Kit
Save time and money by making your magazines legal.
- This Magblock fits the Gen2/M2 Magpul 30-round Pmags.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for Gen2 20-round magazines.
-Magazines can be loaded with the bolt closed.
$15.95 -
HEXMAG AR-10, SR25 10/20 Magblock (.308)
Hexmag AR-10/SR25 Magblock 10/20
- Magblock 10/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 10 rounds.
- Uses the original Hexmag locking plates.
$6.50 As low as: $5.50 -
HEXMAG AR-10, SR25 5/20 Magblock (Hunting)
Hexmag AR-10/SR25 Magblock 5/20
- Magblock 5/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 5 rounds.
- Uses the original Hexmag locking plates.
$6.95 As low as: $5.95