Magblock 10 Round Limiter for Grand Power K100 P1 15 Round Magazines

- Fits 15 round 9mm Factory Grand Power K100 P1 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Grand Power K100 P1 magazines.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #10 showing in the notch to make this limiter. 

10 Block Bulk Pack

• 10 block bulk pack. Includes ONLY the following: Pmag M2/MOE 10/30, Pmag M2/MOE 10/20, USGI 10/30, and USGI 10/20, HK G36, XD/XDm 9 and .40 Pistol blocks, and Glock 9 and .40 Pistol blocks, excluding the Glock 10/33. 
• You MUST specify the quantity and type of each block below. Please be specific. 

Excludes 10/20 Colt blocks and Gen 3 blocks

Pmag 27 GL9 Magblock 10 Round Limiter 10/27

This Magblock fits the Magpul Pmag 27 GL9 magazines used in 9mm Glocks and will limit them to 10 rounds. It is held in place with spring tension alone or can be glued or epoxied if desired.

• Simple install to make 10/27 Pmag 27 GL9 Glock magazines.
• Save Time and Money converting your magazines.
• No modification to the magazine is required.
• Lightweight and will not interfere with magazine reliability.
• Patented Design 

Pmag LR20 Magblock 10/20 GEN 2

Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.

- Will NOT fit new Gen M3 Version. Fits all prior versions.

 - Dust covers still fit with 10 rounds loaded.

 - Load magazines on a closed bolt.

 - Easy to install. 

 - Includes required screw. 

- No external magazine modifications. 

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- Will also fit 30 round Emags.

Note: This is a trimmed down 10 round block to allow 15 rounds.  These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.  

Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 15 rounds.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

Note: This is a trimmed down 10 round block to allow 15 rounds.  These fit Straight Body Gen 2 Pmags only.  Gen 3 limiters are available as a different product. 

15 Round Limiter for Gen M3 30 Round Pmags

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed on many rifles.

- Does not affect reliability.

- No increase in spring pressure. 

- Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.

Magblock 5 Round Limiter for Pmag 10 GL9 Magazines.

- Fits 10 round Magpul Pmag GL9 magazines for Glock 19.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 5 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 10 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #6 showing in the indicator notch. 

Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)

Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install. 

- Will NOT fit older version magazines. Gen M3 Only.

- Dust covers still fit with 10 rounds loaded.

- Load magazines on a closed bolt in most rifles.

- Easy to install.

- No external magazine modifications.

-This block requires you use the factory Magpul locking plate with our block (See picture 1 and 2). 

Hexmag AR-10/SR25 Magblock 10/20

- Magblock 10/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.

- This block will convert a 7.62x51/.308 20 round magazine to hold only 10 rounds. 

- Uses the original Hexmag locking plates.

Hexmag AR-10/SR25 Magblock 5/20

- Magblock 5/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.

- This block will convert a 7.62x51/.308 20 round magazine to hold only 5 rounds. 

- Uses the original Hexmag locking plates.

Magblock 10 Round Limiter for Pmag 12 GL9 Magazines.

- Fits 12 round Magpul Pmag GL9 magazines for Glock 26.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 12 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Magblock 10/60 MCL (Magazine Capacity Limiter) for Magpul 60 round D60 Drum in .223/5.56mm.

- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions. 

Magblock 10/50 MCL (Magazine Capacity Limiter) for Magpul 50 round D50 Drum in 7.62x51.

- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions.