Search results for '15 round'
-
Beretta 92FS 10/18 Magblock (9mm)
Genuine Factory Beretta 92FS Magblock 10/18 (9mm) 10 & 15 Round Limiter
This Magblock fits the factory Beretta 92FS Series 18 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/18 Beretta 92 Series magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 90-two magazines as seen in the photos. Other types of magazines will likely require modification of the limiter.-Will not work on older Beretta 92FS 18 round magazines. Will only work on Beretta magazines pictured below.
*Please click on photos for installation instructions.
*Universal Limiter Instructions: Cut to #18 and glue flush at the bottom for 10/18 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #18 will show in the limiter window notch like in the photos.
Attention: Make sure to verify what magazine you have before ordering.This block will fit the following 18-round 92FS series magazines:
Beretta 90-two, Beretta 92G, Beretta M9, Beretta 92D, Beretta 92 Vertec, Beretta 92F
$6.59 As low as: $5.95 -
CZ-75B 10/15 Magblock (9mm)
Magblock 10 Round Limiter for CZ-75B 15 Round Magazines
- Fits 15 round 9mm CZ75B factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*If using our Universal Limiter for this magazine: Cut to #10 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #10 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
PROMAG M14 -M1A Blocks 10/20
ProMag M14/M1A 7.62x51mm/.308 20 round magazines.
- Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
-This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.
$6.50 As low as: $5.95 -
Springfield SA-35 Magblock 10/15 (9mm)
Springfield SA35 9mm 10/15 Round Magblock
- Fits 15 round SA-35 9mm magazines.
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Can be epoxied for a permanent modification.
- Lightweight, efficient design.
$6.59 As low as: $5.95 -
Springfield XD 10/15 Magblock (9mm)
Springfield XD 9mm 10/15 Round Magblock
- Fits 15 round XD and XD Mod 2 9mm magazines.
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Can be epoxied for a permanent modification.
- Lightweight, efficient design.
*This block is designed for the factory 15 round magazine, made by Springfield. Will not work on Promag XD magazines.
$6.50 As low as: $5.95 -
SPRINGFIELD M14 -M1A 10/15
Fits Springfield M14/M1A 7.62x51mm/.308 15 round magazines.
- Easiest and quickest way to make a 10 round M14 Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
$6.50 As low as: $5.95 -
ETS Glock 19 Magblock 10/15 (9mm)
ETS Glock 9mm Magblock 10 Round Limiter for 15 round Magazines
This Magblock fits the ETS 15 round 9mm magazines for Glocks and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately).
- Simple install to make 10/15 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.ATTENTION: This block is designed for the ETS Glock19 15 round magazine only.
$6.59 As low as: $5.95 -
HERA ARMS H2 AR15 10/20 Magblock Limiter (.556) (10 & 15 Round Limiter)
HERA ARMS H2 Magblock 10/20 (Magazine Capacity Limiter) for AR15/M16 Magazines
- For use in Hera Arms H2 AR-15 type 20 round magazines for the AR15/M16.
- These blocks will convert a 20 round magazine to hold only 10 rounds.$6.50 -
H&K 33, 93, 53 Magblock Limiter 10/30 (10 & 15 Round Limiter)
HK33, C93 and V53 Magazine
- This block will convert 30 round "Made in Germany" Heckler & Koch magazines into a 10 round magazine.
- Works with factory HK .223/5.56mm magazines thats shown in the picture.
- This block allows you to use the factory locking plate.
$6.95 As low as: $5.95 -
H&K 33, 93, 53 Magblock Limiter 10/25 (10 & 15 Round Limiter)
HK33, C93 and V53 Magazine
- This block will convert 25 round "Made in Germany" Heckler & Koch magazines into a 10 round magazine.
- Works with factory HK .223/5.56mm magazines thats shown in the picture.
- This block allows you to use the factory locking plate.
$6.95 As low as: $5.95 -
Zastava Arms PAP M77 .308 Magblock 5, 10, and 15 Round Limiters
Magblock for Zastava Arms PAP M77 .308 20 Round Magazines. 5, 10 and 15 Round Limiters.
Fits Zastava M77 .308/7.62x51mm 20 round magazines made by Zastava Arms.
- Easy to install in seconds.
- Allows the use of the stock locking plate.
- No external magazine modifications.
- Select 5, 10 or 15 round limiter below.- Tested in Zastava Arms M77 PAP magazines made by Zastava.
$6.50 As low as: $5.95 -
Kel-Tec PMR-30 22WMR 10 and 15 Round Magblock
Kel-Tec PMR-30 22WMR 10/30 Magblock 10 or 15 Round Limiter
- This block will convert 30 round Kel-Tec PMR-30 22WMR magazines into a 10 or 15 round magazine.
- Easy to install without damage to your magazines.
$6.59 As low as: $5.95 -
Steyr AUG 10/30 Magblock (10 & 15 Round Limiter)
10 Round Limiter for Steyr AUG 30 Round Polymer Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for Steyr AUG 30 round polymer magazines in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Customized base of the Magblock includes two locking points just like the original locking plate.
- Does not affect reliability.
- No increase in spring pressure.
$6.95 As low as: $6.50 -
AR-10 ArmaLite Magblock (10 or 15 Round Limiter)
Magblock for ArmaLite AR10 20 Round Magazines. 10 and 15 Round Limiters.
Fits ArmaLite AR10 .308/7.62x51mm 20 round magazines and will convert them to hold either 10 or 15 rounds.
- Easy to install in seconds.
- No need to drill any holes.
- Load magazines on a closed bolt in most rifles.
- No external magazine modifications required.New lighter, more reliable design is made from abs plastic.
$6.95 As low as: $5.95 -
VEPR .308 Magblock 5, 10, and 15 Round Limiters
Magblock for Vepr .308 20 Round Magazines. 5, 10 and 15 Round Limiters.
Fits Vepr .308/7.62x51mm 20 round magazines made by Csspecs>
- Easy to install in seconds.
- Tested in Vepr magazines made by Csspecs. May fit other manufacturers with or without modification.
- Replaces the original locking plate.
- No external magazine modifications.
- Select 5, 10 or 15 round limiter below.$6.95 As low as: $5.95