Search results for '15 round'
-
CAA 15/30 Magblock 15 Round Limiter
15 Round Limiter for CAA Indicative 30 Round Polymer Magazines
Magblock 15/30 MCL (Magazine Capacity Limiter) for CAA 30 round polymer magazines in .223/5.56mm.
- This block will attach to the bottom of the spring, and sits on top of the original locking plate.
- Easy conversion of 30 round CAA magazines to hold 15 rounds.
- Does not affect reliability.
- No increase in spring pressure.$6.25 As low as: $5.25 -
VEPR .308 Magblock 5, 10, and 15 Round Limiters
Magblock for Vepr .308 20 Round Magazines. 5, 10 and 15 Round Limiters.
Fits Vepr .308/7.62x51mm 20 round magazines made by Csspecs>
- Easy to install in seconds.
- Tested in Vepr magazines made by Csspecs. May fit other manufacturers with or without modification.
- Replaces the original locking plate.
- No external magazine modifications.
- Select 5, 10 or 15 round limiter below.$6.95 As low as: $5.95 -
AR-10 ArmaLite Magblock (10 or 15 Round Limiter)
Magblock for ArmaLite AR10 20 Round Magazines. 10 and 15 Round Limiters.
Fits ArmaLite AR10 .308/7.62x51mm 20 round magazines and will convert them to hold either 10 or 15 rounds.
- Easy to install in seconds.
- No need to drill any holes.
- Load magazines on a closed bolt in most rifles.
- No external magazine modifications required.New lighter, more reliable design is made from abs plastic.
$6.95 As low as: $5.95 -
Steyr AUG 10/30 Magblock (10 & 15 Round Limiter)
10 Round Limiter for Steyr AUG 30 Round Polymer Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for Steyr AUG 30 round polymer magazines in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Customized base of the Magblock includes two locking points just like the original locking plate.
- Does not affect reliability.
- No increase in spring pressure.
$6.95 As low as: $6.50 -
Sale
GEN M3 Pmag MCL 15/30 Block (15 Round Limiter)
15 Round Limiter for Gen M3 30 Round Pmags
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed on many rifles.
- Does not affect reliability.
- No increase in spring pressure.
- Compatable with new Magpul Gen 3 Pmags only. These will not work in original Pmags.
-
Zastava Arms PAP M77 .308 Magblock 5, 10, and 15 Round Limiters
Magblock for Zastava Arms PAP M77 .308 20 Round Magazines. 5, 10 and 15 Round Limiters.
Fits Zastava M77 .308/7.62x51mm 20 round magazines made by Zastava Arms.
- Easy to install in seconds.
- Allows the use of the stock locking plate.
- No external magazine modifications.
- Select 5, 10 or 15 round limiter below.- Tested in Zastava Arms M77 PAP magazines made by Zastava.
$6.50 As low as: $5.95 -
H&K 33, 93, 53 Magblock Limiter 10/25 (10 & 15 Round Limiter)
HK33, C93 and V53 Magazine
- This block will convert 25 round "Made in Germany" Heckler & Koch magazines into a 10 round magazine.
- Works with factory HK .223/5.56mm magazines thats shown in the picture.
- This block allows you to use the factory locking plate.
$6.95 As low as: $5.95 -
H&K 33, 93, 53 Magblock Limiter 10/30 (10 & 15 Round Limiter)
HK33, C93 and V53 Magazine
- This block will convert 30 round "Made in Germany" Heckler & Koch magazines into a 10 round magazine.
- Works with factory HK .223/5.56mm magazines thats shown in the picture.
- This block allows you to use the factory locking plate.
$6.95 As low as: $5.95 -
HERA ARMS H2 AR15 10/20 Magblock Limiter (.556) (10 & 15 Round Limiter)
HERA ARMS H2 Magblock 10/20 (Magazine Capacity Limiter) for AR15/M16 Magazines
- For use in Hera Arms H2 AR-15 type 20 round magazines for the AR15/M16.
- These blocks will convert a 20 round magazine to hold only 10 rounds.$6.50 -
SPRINGFIELD M14 -M1A 10/15
Fits Springfield M14/M1A 7.62x51mm/.308 15 round magazines.
- Easiest and quickest way to make a 10 round M14 Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
$6.50 As low as: $5.95 -
Browning BAR 10/20 Magblock
Fits Browning BAR .30-06 20 round magazines.
- Easiest and quickest way to make a 10 round Browning BAR Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
$9.95 As low as: $7.95 -
PROMAG M14 -M1A Blocks 10/20
ProMag M14/M1A 7.62x51mm/.308 20 round magazines.
- Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
-This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.
$6.50 As low as: $5.95 -
PMAG AK47 10/20 Magblock (7.62)
Magblock 10 and 15 Round Limiter for Magpul 20 Round AK-47 Pmag (7.62x39mm)
This block fits the new Magpul 20 round AK47 magazines and will convert them to hold 10 rounds.
- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 10 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else.*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #24.5 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size.
Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount. See our upgrade springs here: LINK$7.49 As low as: $5.95 -
Russian Bakelite AK47 10/40 Magblock
Magblock for Bakelite AK47 (7.62x39mm) Magazines.
- This block fits the Bakelite 40 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK
$10.95 As low as: $8.95