Search results for 'pmag magazines'
-
PMAG AK47 5/30 Round Limiter (Hunting)
Magblock 5 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)
This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 5 rounds for Hunting.
- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Patented design not available anywhere else.*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. Along with an adapter.
$10.95 As low as: $8.95 -
Magpul Enhanced Self-leveling Follower USGI .223 - FOL GRN
The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the current issue aluminum USGI 30-round magazine follower.
Featuring a patent pending 4-way anti-tilt design, the Enhanced Self-Leveling Follower is made from a non-hydroscopic and self-lubricating polymer.
Made in U.S.A.
$2.39 -
Magpul Enhanced Self-leveling Follower USGI .223 - Yellow
The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the current issue aluminum USGI 30-round magazine follower.
Featuring a patent pending 4-way anti-tilt design, the Enhanced Self-Leveling Follower is made from a non-hydroscopic and self-lubricating polymer.
Made in U.S.A.
$2.39 -
Magpul Ranger Plate 223
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG.
The ranger plate incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Made in U.S.A.
$5.95 -
Pmag Ranger Plate .223 Foliage
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Pmag Ranger Plate .223 OD
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Pmag Ranger Plate .223 FDE
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$7.95 -
Pmag Ranger Plate .223 Black
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$7.95 -
Pmag LR 10 Magblock 5/10 (.308) Gen M3 (5 Round)
Pmag LR10 Magblock GEN M3 Magazine Capacity Limiters (5 Round for Hunting)
Fits the Magpul LR10 .308/7.62x51mm 10 round Pmags and will convert them to hold only 5 rounds for hunting.
- Will NOT fit older version magazines. Gen M3 Only.
- Load magazines on a closed bolt in most rifles.
- Easy to install. New style block allows you to use the stock locking plate.
- No external magazine modifications.
$6.50 As low as: $5.95 -
Pmag LR 20 Magblock 10/20 (.308) Gen 2
Pmag LR20 Magblock 10/20 GEN 2
Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.
- Will NOT fit new Gen M3 Version. Fits all prior versions.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt.
- Easy to install.
- Includes required screw.
- No external magazine modifications.
$6.50 As low as: $4.50 -
Pmag Ranger Plate .223 Black- Gen M3
For use with Magpul Pmag Gen M3Gen M3 Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG Gen M3 that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Fits Gen M3 Pmags only in 10, 20, and 30 round sizes.
$7.95 -
GEN M2 PMAG 10/30 (RETAIL 3 PACK)
Gen M2 Magpul PMag 10/30 limiter 3 Pack Kit
Save time and money by making your magazines legal.
- This Magblock fits the Gen2/M2 Magpul 30-round Pmags.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for Gen2 20-round magazines.
-Magazines can be loaded with the bolt closed.
$15.95 -
Magblock Locking Plate for Magpul Pmag
MagazineBlocks LLC locking plate for Magpul PMAG .223/ 5.56 magazines. Fits 10, 20, and 30 round Pmags. This is our brand locking plate since we are sold out of originals. Works the same. Choose Generation of your magazines below: Gen M3 will state this on the side. If you don’t see it then you have Gen 2 / /MOE pmags.$4.00 -
PROMAG M14 -M1A Blocks 10/20
ProMag M14/M1A 7.62x51mm/.308 20 round magazines.
- Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
-This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.
$6.50 As low as: $5.95 -
Pmag Magpul 300Blackout 15/30 Magblock
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in 300 Blackout only.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.- Does not affect reliability.
- No increase in spring pressure.
$5.99 As low as: $5.50