Search results for 'pack ranger plates'
-
Magpul Ranger Plate 223
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG.
The ranger plate incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Made in U.S.A.
$5.95 -
Pmag Ranger Plate .223 Foliage
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Pmag Ranger Plate .223 OD
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Pmag Ranger Plate .223 FDE
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$7.95 -
Pmag Ranger Plate .223 Black
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$7.95 -
Pmag Ranger Plate .223 Black- Gen M3
For use with Magpul Pmag Gen M3Gen M3 Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG Gen M3 that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Fits Gen M3 Pmags only in 10, 20, and 30 round sizes.
$7.95 -
Magblock Locking Plate for Magpul Pmag
MagazineBlocks LLC locking plate for Magpul PMAG .223/ 5.56 magazines. Fits 10, 20, and 30 round Pmags. This is our brand locking plate since we are sold out of originals. Works the same. Choose Generation of your magazines below: Gen M3 will state this on the side. If you don’t see it then you have Gen 2 / /MOE pmags.$4.00 -
Sale
10 Block Bulk Pack
10 Block Bulk Pack
- 10 block bulk pack. Includes ONLY the following: Pmag M2/MOE 10/30, Pmag M2/MOE 10/20, USGI 10/30, and USGI 10/20, HK G36, XD/XDm 9 and .40 Pistol blocks, and Glock 9 and .40 Pistol blocks, excluding the Glock 10/33.
- You MUST specify the quantity and type of each block below. Please be specific.
Excludes 10/20 Colt blocks and Gen 3 blocks
Regular Price: $45.00
Special Price $39.95
-
Glock Pistol Limiter Kit (RETAIL 3 PACK)
Glock Pistol Limiter 3 Pack Kit
Save time and money by making your magazines legal.
- This Glock Magblock fits most magazines from .Glock 17, Glock 34 (Without Cutting), Glock 22, Glock 35, Glock 19, Glock 23, Glock 20, Glock 41, Glock 19x (17rd magazine only).
- Easily installs into the follower (Only for Use in Gen3, Gen4 and Gen5 Magazines) . It is held in place with spring tension alone or can be epoxied if desired.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
Attention: Checkout the discounted items we offer to complete your magblock build.
$19.95 As low as: $18.95 -
GEN M2 PMAG 10/30 (RETAIL 3 PACK)
Gen M2 Magpul PMag 10/30 limiter 3 Pack Kit
Save time and money by making your magazines legal.
- This Magblock fits the Gen2/M2 Magpul 30-round Pmags.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for Gen2 20-round magazines.
-Magazines can be loaded with the bolt closed.
$15.95 -
GEN M3 PMAG 10/30 (RETAIL 3 PACK)
Gen M3 Magpul PMag 10/30 limiter 3 Pack Kit
Save time and money by making your magazines legal.
- This Magblock fits the Gen3/M3 Magpul 30-round Pmags.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for Gen3 20-round and 10-round magazines.
-Magazines can be loaded with the bolt closed.
$15.95 -
Magblock Universal Pistol Limiter Kit (RETAIL 3 PACK)
Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.Save time and money by making your magazines legal.
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.
- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.
- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal
$19.95 As low as: $18.95 -
Mag Magnet Device
Mag Magnet for AR15
ALL NEW and Improved Generation 2 model, using the N52 Neodymium Magnet for strongest hold with 1.3 lb more strength than the original.
Mag Magnet is a patented product that is magnetized and used with the standard bullet button for California legal AR-15's. Mag Magnet is a true original, don't fall for cheap imitations.
For use with the standard AR-15 platform (.223/5.56mm).
Mag Magnet is not compatible with the Prince 50 or the Raddlock. It only works with the standard Bullet Button™.Magblock LLC only recommends use of this device out of state or with .22 rimfire conversion kits only.
Leaving Mag-Magnet on a firearm may designate it as an illegal assault weapon in violation of California law. Do not use Mag-Magnet in California on magazines with capacities greater than 10 rounds. It is advised that Mag-Magnet users become familiar with California DOJ requirements and updated interpretations of existing laws and regulations.
Magblock LLC shall not be held responsible in any way for the inappropriate use of the product by the user. User assumes all liabilities and risks associated with ownership and use of this product.
$24.95 As low as: $20.95 -
Panzer Arms MKA1919 AR-12 Magblock 5/10 (12ga)
Magblock for Panzer Arms MKA1919 AR-12 5 Round Limiter for 10 Round Magazines (12ga)
- Fits Panzer Arms 10 round magazines and will limit them to 5 rounds.
- Fits at the base of the magazine. This block will replace the factory locking plate.
$6.95