Search results for '10%2F30 pmag block'
-
PROMAG M14 -M1A Blocks 10/20
ProMag M14/M1A 7.62x51mm/.308 20 round magazines.
- Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
-This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.
$6.50 As low as: $5.95 -
Mission First Tactical 10/30 Magblock
Magblock 10/30 MCL (Magazine Capacity Limiter) for Mission First Tactical 30 round Magazine in .223/5.56mm.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Will work on Standard Mission First Tactical and Extreme Duty mags.
-The stock locking plate is to be used with this Magblock.
$6.59 As low as: $5.95 -
Sale
Pmag Gen 2 MOE 10/30 Magblock
Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Will also fit 30 round Emags.
- Compatable with original Pmags and "M" Series only. These will not work without modifications in Gen 3 or M3 Pmags. We will have another product set up to buy pre-trimmed M3 blocks. Here are instructions on how to trim blocks to work with Gen M3 Pmags: http://www.calguns.net/calgunforum/showpost.php?p=9787410&postcount=261
-
Sale
GEN M3 Pmag MCL 10/30 Magblock
10 Round Limiter for Gen M3 30 Round Pmags
Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Compatable with new Magpul Gen 3 Pmags only. These will not work in original Pmags. Can NOT be snapped down to fit 20 round Gen M3 Pmags. Please order pre-trimmed blocks for your 20 round Gen M3 Magazines.
-
Sale
PMAG 20 MCL 10/20 Magblock (Straight Body Gen 2)
Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm Gen M2 Only.
- This block will replace the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Fits Gen 2 Pmag 20 only (Straight body)
-
Magpul PMag CZ Scorpion Evo Magblock 10/35 (9mm)
Magblock 10 Round Limiter for Magpul PMag CZ Scorpion Evo (9mm) 35 Round Magazines
- Fits 35 round 9mm Magpul PMag35 CZ Scorpion Evo magazines
- Easy installation at the base of the spring on top of the original locking plate so you wont loose your original.
- Limits the magazine to 10 rounds of 9mm.
- Lightweight, efficient design.
- Made of a strong, heat resistant, polymer.$6.95 As low as: $5.95 -
Magpul D50 10/50 Magblock (7.62x51)
Magblock 10/50 MCL (Magazine Capacity Limiter) for Magpul 50 round D50 Drum in 7.62x51.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions.$14.95 -
Magpul D60 10/60 Magblock (5.56)
Magblock 10/60 MCL (Magazine Capacity Limiter) for Magpul 60 round D60 Drum in .223/5.56mm.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions.$14.95 -
HEXMAG AR-10, SR25 5/20 Magblock (Hunting)
Hexmag AR-10/SR25 Magblock 5/20
- Magblock 5/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 5 rounds.
- Uses the original Hexmag locking plates.
$6.95 As low as: $5.95 -
HEXMAG AR-10, SR25 10/20 Magblock (.308)
Hexmag AR-10/SR25 Magblock 10/20
- Magblock 10/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 10 rounds.
- Uses the original Hexmag locking plates.
$6.50 As low as: $5.50 -
Pmag LR 20 Magblock 10/20 Gen M3 (.308)
Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)
Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install.
- Will NOT fit older version magazines. Gen M3 Only.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt in most rifles.
- Easy to install.
- No external magazine modifications.
-This block requires you use the factory Magpul locking plate with our block (See picture 1 and 2).
$6.50 As low as: $5.95 -
Sale
GEN M3 Pmag MCL 15/30 Block (15 Round Limiter)
15 Round Limiter for Gen M3 30 Round Pmags
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed on many rifles.
- Does not affect reliability.
- No increase in spring pressure.
- Compatable with new Magpul Gen 3 Pmags only. These will not work in original Pmags.
-
Gen 2 Pmag 15/20 Magblock (Gen 2)
Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)
- This block will replace the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 15 rounds.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
Note: This is a trimmed down 10 round block to allow 15 rounds. These fit Straight Body Gen 2 Pmags only. Gen 3 limiters are available as a different product.
$5.95 As low as: $3.95 -
Gen 2 Pmag 15/30 Magblock (GEN 2)
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Will also fit 30 round Emags.
Note: This is a trimmed down 10 round block to allow 15 rounds. These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.
$5.95 As low as: $3.95 -
Pmag LR 20 Magblock 10/20 (.308) Gen 2
Pmag LR20 Magblock 10/20 GEN 2
Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.
- Will NOT fit new Gen M3 Version. Fits all prior versions.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt.
- Easy to install.
- Includes required screw.
- No external magazine modifications.
$6.50 As low as: $4.50