Search results for 'MAGPUL 10/20'
-
Sale
GEN M3 PMAG 10/20 Magblock
Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Gen M3 Pmags in .223/5.56mm.
- Fits NEW Gen M3 Pmag 20 (Curved body)
- This block will replace the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed in most rifles. Some trimming of the limiter may be required for this.
- Does not affect reliability.
- No increase in spring pressure.
Regular Price: $6.25
Special Price $4.95
-
PMAG AK47 10/20 Magblock (7.62)
Magblock 10 and 15 Round Limiter for Magpul 20 Round AK-47 Pmag (7.62x39mm)
This block fits the new Magpul 20 round AK47 magazines and will convert them to hold 10 rounds.
- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 10 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else.*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #24.5 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size.
Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount. See our upgrade springs here: LINK$7.49 As low as: $5.95 -
Sale
PMAG 20 MCL 10/20 Magblock (Straight Body Gen 2)
Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm Gen M2 Only.
- This block will replace the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Fits Gen 2 Pmag 20 only (Straight body)
-
Pmag LR 20 Magblock 10/20 Gen M3 (.308)
Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)
Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install.
- Will NOT fit older version magazines. Gen M3 Only.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt in most rifles.
- Easy to install.
- No external magazine modifications.
-This block requires you use the factory Magpul locking plate with our block (See picture 1 and 2).
$6.50 As low as: $5.95 -
Pmag LR 20 Magblock 10/20 (.308) Gen 2
Pmag LR20 Magblock 10/20 GEN 2
Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.
- Will NOT fit new Gen M3 Version. Fits all prior versions.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt.
- Easy to install.
- Includes required screw.
- No external magazine modifications.
$6.50 As low as: $4.50 -
PROMAG M14 -M1A Blocks 10/20
ProMag M14/M1A 7.62x51mm/.308 20 round magazines.
- Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
-This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.
$6.50 As low as: $5.95 -
HEXMAG AR-10, SR25 5/20 Magblock (Hunting)
Hexmag AR-10/SR25 Magblock 5/20
- Magblock 5/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 5 rounds.
- Uses the original Hexmag locking plates.
$6.95 As low as: $5.95 -
HEXMAG AR-10, SR25 10/20 Magblock (.308)
Hexmag AR-10/SR25 Magblock 10/20
- Magblock 10/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 10 rounds.
- Uses the original Hexmag locking plates.
$6.50 As low as: $5.50 -
Sale
Steyr Aug PMag 10/30 Magblock Limiter
Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Steyr Aug Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
Regular Price: $5.95
Special Price $4.95
-
Gen 3 Pmag 10/40 Magblock
10 Round Limiter for Gen M3 40 Round Pmags
Magblock 10/40 MCL (Magazine Capacity Limiter) for Magpul 40 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 40 round magazine to hold only 10 rounds.
- Includes 2 part limiter for extra height.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- Compatible with the 40 round Magpul Gen 3 Pmags only.
$7.49 As low as: $5.95 -
PMAG AK-74 Magblock Limiter (5.45)
Magblock 10 Round Limiter for Magpul 30 Round AK-74 Pmag (5.45x39mm)
- This block fits the new Magpul 30 round AK74 magazines and will convert them to hold 10 rounds.
- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Made of super strong heat resistant polymer.
$7.49 As low as: $5.95 -
Magpul Ranger Plate 223
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG.
The ranger plate incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Made in U.S.A.
$5.95 -
Pmag Ranger Plate .223 Foliage
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Pmag Ranger Plate .223 OD
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Pmag Ranger Plate .223 FDE
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$7.95