Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

AK47, AK74

10 Round Limiters for AK-47 in 7.62x39mm and AK-74 5.45x39mm Magazines. Some have options to cut for 15 rounds. 

Set Descending Direction

Grid List

  1. 10 Round Limiter for Tapco AK47 Magazines

    AK 10/30 Block for Tapco

    Magblock for Tapco AK47 10/30, 10/20. 15/30 Limiter  (7.62x39mm)

    - This block fits the Tapco 30 round AK47 magazines 7.62x39mm and will convert them to a 10 round magazine.

    - Replaces the lower locking plate for an easy and secure install.

    - Also marked where to cut to make 10 round blocks for the 20 round Tapco AK magazines.

    - Now marked where to cut for a 15 round limiter for 30 round Tapco Magazines. 

  2. 10 Round Limiter for VZ58 Magazines

    VZ58 Magblock 10/30 Limiter

    Magblock for VZ 58 (7.62x39mm) Magazines.

    - This block fits the VZ.58 30 round magazines in 7.62x39mm and will convert them to a 10 round magazine.

    - Replaces the lower locking plate for an easy and secure install.

    - These are marked as an "AK47" limiter but is modified to work in the VZ.58. I know these rifles don't usually share any parts :)

    -NOTE: Only fits the type of VZ.58 magazine shown in the photos. These will not work if your magazine internals are significantly different than those pictured.

  3. Magblock 10 Round limiter for the new Magpul Pmag AK47 magazine.

    *NEW* PMAG AK47 10 and 15 Round Limiters

    Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

    - This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.

    - Choose the option below if you need a 15 round limiter.

    - Replaces the lower locking plate for an easy and secure install.

    - Built in spring catch holds the limiter securely in place and prevents noise.

    - Made of super strong heat resistant polymer.

  4. 10 Round Limiter for Promag and Bulgarian AK47 Magazines

    AK47 10/30 Block for Promag and Bulgarian Magazines

    Magblock for Promag and some Bulgarian AK47 (7.62x39mm) Magazines.

    - This block fits the Promag and Bulgarian (Plastic follower only) 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.

    - Replaces the lower locking plate for an easy and secure install.

    - Note: This is a modified Tapco limiter so will be marked with Tapco markings. The cut down lines for other sizes are not accurate. Only for use with 30 round magazines.

  5. Vepr Magazine and Magblock

    Vepr 7.62x39 mm 10/30 Magblock

    Vepr 7.62 x 39 mm 10/30 Magblock- for SMG Tactical / Surefire Magazines

    - Converts the Vepr polymer 7.62 x 39 mm 30 round magazine made by SMG Tactical to 10 rounds.

    - This block fits the 30 round  Vepr SMG (Surefire Gun Mags) or Surefire Magazines. (May fit others, but not tested at this time)

    - This block will replace the original magazine locking plate.

    - Also fits the Saiga 30 round 7.62x39 magazines made by SMG. 

  6. Tapco AK47 10/30

    AK 10/20 Block for Tapco

    Tapco AK47 10/20 Magblock

    This block fits the Tapco 20 round AK47 magazines and will convert them to a 10 round magazine.

    -Replaces the lower locking plate.

    -Works on Tapco 7.62x39mm 20 Round AK magazines.

  7. Arsenal AK47 10/30

    AK 10/30 Block for Arsenal

    Arsenal Bulgarian AK47 10/30 Magblock

    This block fits the Arsenal 30 round AK47 magazines and will convert them to a 10 round magazine.

    -Replaces the lower locking plate.

    -Works on Arsenal Bulgarian 7.62x39mm AK magazines.

    Note: This is a modified Tapco block and may have Tapco markings.

  8. AK-74 10/30 Magblock for Tapco magazines

    AK-74 10/30 Magblock (5.45x39)

    AK-74 Magblock for 5.45x39mm 30 round magazines

    • This AK-74 block fits most 30 round polymer 5.45x39 mm magazines and will convert them to hold only 10 rounds.
    • The new design features a spring catch which will allow an easy attachment point to the spring.
    • This prevents the block making noise and epoxy can be added at this point to make it permanent.
    • This block will replace the original magazine locking plate.
    • Marked where to cut for a 15 round block for NJ. 

    Tested on the following AK74 magazines with perfect function:
    Tapco, Circle 21, Izmash, and East German Bakelite.  Will likely fit other similar magazines. Let us know and we will update the list. 

  9. AK47 Universal 10/30 Magblock

    Universal AK 10/30 Block

    Universal AK47 10/30 Magblock

    Fits most steel 30 round AK47 magazines and will convert them to hold only 10 rounds. Works best in magazines with flat locking plates like in the first photo. These tend to be Romanian, Russian, and Chinese magazines. Other plates may need to be modified to work correctly demonstrated in the second photo. This is encountered with some Bulgarian manufactured magazines. 

    - Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.
    - Marked where to cut to make 10/20 Tanker blocks.
    - Marked to make 15/30 magazines for New Jersey.
    - Works on many military spec steel AK47 magazines.

    NOTE: These are as close to universal as we can get them. Every country and manufacture has their own AK magazine version with small modifications. Some fitting may be required. If you can only fit 9 rounds some filing of the top or bottom of the block will be needed to fit 10. Just take your time.  Also be sure that the metal locking plate on the magazine is flat and does not have tabs pushing up against the block. Bend these flat if so.  Remember It's better to have a 9 round magazine than an 11 round one in some areas.

    - If you are interested in identification of your AK magazines here is an excellent resource: AK47 Mag Identification

  10. 10 Round Limiter for IO or Inter Ordnance AK47 30 Round Magazines

    AK47 10/30 Magblock for IO (Inter Ordnance) Magazines

    Magblock for IO Inc. or Inter Ordnance AK47 (7.62x39mm) Magazines.

    - This block fits the 30 round AK47 magazines in 7.62x39mm made by IO and will convert them to a 10 round magazine.

    - Replaces the lower locking plate for an easy and secure install.

Set Descending Direction

Grid List