Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Products

Set Descending Direction

Grid List

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Magblock 10 Round Limiter for H&K SA80 Magazines.

    H&K Magblock 10/30 Limiter (SA80 and HK416)

    H&K Magblock 10/30 Limiter

    - For use in H&K SA80 and HK416 type 30 round magazines as pictured.

    - These blocks will convert a 30 round magazine to hold only 10 rounds.

    - The locking plate is not used with the limiter installed.

  2. 5.45 x 39 mm 10 Round Limiter. Fits 30 round magazines and installs as shown.

    5.45x39 AR15 Magblock 10/30 Limiter

    Magblock 10/30 limiter for 5.45x39 mm AR Magazines only.

    - Tested in C-Products and ACS magazines.
    - These blocks will convert a 30 round 5.45x39 mm magazine to hold only 10 rounds.

  3. Magblock 10 Round limiter for the new Magpul Pmag AK47 magazine.

    *NEW* PMAG AK47 10 and 15 Round Limiters

    Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

    - This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.

    - Choose the option below if you need a 15 round limiter.

    - Replaces the lower locking plate for an easy and secure install.

    - Built in spring catch holds the limiter securely in place and prevents noise.

    - Made of super strong heat resistant polymer.

  4. 10 Round Limiter for VZ58 Magazines

    VZ58 Magblock 10/30 Limiter

    Magblock for VZ 58 (7.62x39mm) Magazines.

    - This block fits the VZ.58 30 round magazines in 7.62x39mm and will convert them to a 10 round magazine.

    - Replaces the lower locking plate for an easy and secure install.

    - These are marked as an "AK47" limiter but is modified to work in the VZ.58. I know these rifles don't usually share any parts :)

    -NOTE: Only fits the type of VZ.58 magazine shown in the photos. These will not work if your magazine internals are significantly different than those pictured.

  5. CZ P-07 9mm 10 round limiter

    CZ P-07 Magblock 10/15 (9mm)

    Magblock 10 Round Limiter for CZ P-07 (9mm) 15 Round Magazines

    - Fits 15 round 9mm CZ P-07 magazines
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

    -** Universal Pistol Limiter Instructions: Cut to between "11-12" showing in the indicator notch and a flush base.

  6. CZ P-09 10 Round Limiter for 19 Round Magazines

    CZ P-09 Magblock 10/19 (9mm)

    Magblock 10 Round Limiter for CZ P-09 (9mm) 19 Round Magazines

    - Fits 19 round 9mm CZ P-09 magazines
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  7. TEC-9 Magblock 10 Round Limiter. Easily installs as shown here. Please see the other photos to be sure your magazines are the same type.

    TEC-9 10/32 Magblock 9mm

    10 Round Limiter for 32 Round TEC-9 Magazines

    Magblock 10/32 Magazine Capacity Limiter for the TEC-9 32 round 9mm magazines pictured here.

    - This block sits on top of the locking plate to convert a 32 round magazine to hold only 10 rounds.

    - Very easy to install

    - Does not affect reliability.

    - No increase in spring pressure.

    - Block is marked "STEN" with "2X" at the end.

  8. Magblock 10 Round Limiter for the Gen M3 LR25 Pmag. (Note: 10/20 limiter pictured, but the 10/25 and 15/25 are very similar)

    Pmag LR 25 Magblock (.308) Gen M3 (10 & 15 Round Limiters)

    Pmag LR25 GEN M3 Magblock Magazine Capacity Limiters (10, and 15 Round Limiters Available)

    Fits the Magpul LR25 (25 Round) .308/7.62x51mm Pmags and will convert them to hold only 10 or 15 rounds. Select desired size below. Easy to install. Video instructions available under the FAQ Video link. Attaches to the original locking plate with an included screw. No need to drill any holes. Only a screw driver is needed to install

    - Only for 25 round magazines.

    - Dust covers still fit with 10 rounds loaded.

    - Load magazines on a closed bolt in most rifles.

    - Easy to install.

    - Includes required screw.

    - No external magazine modifications.

  9. Kel-Tec PMR-30 10 Round Limiter from Magblock LLC

    Kel-Tec PMR-30 22WMR 10 and 15 Round Magblock

    Kel-Tec PMR-30 22WMR 10/30 Magblock 10 or 15 Round Limiter

    - This block will convert 30 round Kel-Tec PMR-30 22WMR magazines into a 10 or 15 round magazine.

    - Easy to install without damage to your magazines.

  10. Hexmag 10 round limiter by Magblock installs easily and quickly above the original Hexmag locking plate. This allows use of multi color locking plate options and no increase in spring tension.

    HEXMAG .223 /5.56mm AR15 10/30 Magblock

    Hexmag AR-15 Magblock 10/30

    - Magblock 10/30 MCL block for use in polymer Hexmag AR-15 magazines.

    - This block will convert a 30 round magazine to hold only 10 rounds. 

    - Uses the original Hexmag locking plates.

  11. Sale
    USGI 10/30 MCL

    USGI MCL 15/30 Block

    Magblock 15/30 USGI MCL (Magazine Capacity Limiter)

    - For use in USGI type 30 round magazines.
    - These blocks will convert a 30 round magazine to hold only 15 rounds.
    - Works great Magpul anti-tilt followers.
    - Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

    -Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

    - See our FAQ section for details about using with Magpul Ranger Plates and L-Plates. http://www.magazineblocks.com/magento/faq 
    We have found two different methods that can be used for USGI Ranger Plates and L-Plates. We have added custom options below to buy with the bottom locking tab still in place (Method #1), or converted for use with both parts of the Ranger/L-plate as Magpul intended (Method #2). You can also convert them yourself using the pictures in the FAQ section as a guide. 

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  12. SCAR 17 Magblock 10/20 limits 20 round magazines down to 10 rounds. Easy to install.

    SCAR 17 Magblock 10/20

    SCAR 17 MAGBLOCK  

    - New and Improved Easy Install Design.

    - This block will fit original 7.62x51mm NATO/.308 SCAR 17 Magazines made by FNH.

    - The block attaches to the bottom of the magazine spring and will convert 20 round magazines to hold only 10 rounds.

    - No modifications to your expensive FN SCAR magazines are needed to install.

    - The block can be epoxied to the spring for a permanent modification.

    Made from a solid polymer. These are very strong and heat stable to over 260 degrees F. 

    *PATENT PENDING*


  13. UBBT Kit B

    UBBT Kit B

    Ultimate Bullet Button Took Kit B for PMAG polymer magazines (sealed or unsealed).
    $5.99
  14. UBBT_Kit_A

    UBBT Kit A

    Ultimate Bullet Button Kit A will install on ANY brand of stamped sheetmetal magazine
    $5.99
  15. USGI 10/30 MCL

    USGI AR15 MCL 10/30 Limiter

    Magblock 10/30 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines

    - For use in USGI type 30 round magazines for the AR15/M16. 
    - Will also fit SCAR 16 GI Magazines.
    - These blocks will convert a 30 round magazine to hold only 10 rounds.
    - Works great Magpul anti-tilt followers.
    - Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

    -Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

    - See our FAQ section for details about using with Magpul Ranger Plates and L-Plates. http://www.magazineblocks.com/magento/faq 
    We have found two different methods that can be used for USGI Ranger Plates and L-Plates. We have added custom options below to buy with the bottom locking tab still in place (Method #1), or converted for use with both parts of the Ranger/L-plate as Magpul intended. You can also convert them yourself using the pictures in the FAQ section as a guide. 

Set Descending Direction

Grid List

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6