Staccato (STI)
-
MBX Extreme Bul Armory 155mm 10/26 Magblock (9mm)
Magblock 10 Round Limiter for MBX Extreme 155mm 26 Round 9mm Magazines
- Fits 26 round 9mm Factory MBX Extreme Bul Armory 155 mm magazines with COMPETITION FOLLOWER .
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9MM.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.$7.95 As low as: $5.95 -
Atlas Gunworks 120mm Slidelock 10/16 Magblock (9mm)
Magblock 10 Round Limiter for Atlas Gunworks Slidelock 120mm 16 Round 9mm Magazines
- Fits 18 round 9mm Factory Atlas Gunworks 120 mm magazines.
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.$6.95 As low as: $5.95 -
Atlas Gunworks 140mm Slidelock 10/21 Magblock (9mm)
Magblock 10 Round Limiter for Atlas Gunworks Slidelock 140mm 21 Round 9mm Magazines
- Fits 21 round 9mm Factory Atlas Gunworks 140mm magazines.
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.$6.95 As low as: $5.95 -
Atlas Gunworks 126mm Slidelock 10/18 Magblock (9mm)
Magblock 10 Round Limiter for Atlas Gunworks Slidelock 126mm 18 Round 9mm Magazines
- Fits 18 round 9mm Factory Atlas Gunworks 126 mm magazines.
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.$6.95 As low as: $5.95 -
MBX Extreme 126mm 10/15 Magblock (.45)
Magblock 10 Round Limiter for MBX Extreme 126mm 15 Round .45 Magazines
- Fits 15 round .45 Factory MBX Extreme Staccato STI 126 mm magazines.
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of .45acp.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.$6.59 As low as: $5.95 -
STI Staccato C2 10/15 Magblock (9mm)
Magblock 10 Round Limiter for STI Staccato 120mm 15 Round 9mm Magazines
- Fits 15 round 9mm Factory Staccato STI C2 120 mm magazines.
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.$6.95 As low as: $5.95 -
STI Staccato CS 10/16 Magblock (9mm)
Magblock 10 Round Limiter for STI Staccato CS 16 Round 9mm Magazines
- Fits 16 round 9mm Factory Staccato STI CS magazines.
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.$6.59 As low as: $5.95 -
STI Staccato C2 10/16 Magblock (9mm)
Magblock 10 Round Limiter for STI Staccato 120mm 16 Round 9mm Magazines
- Fits 16 round 9mm Factory Staccato STI C2 120 mm magazines.
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below.
$6.95 As low as: $5.95 -
Magblock Universal Pistol Limiter Kit (RETAIL 3 PACK)
Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.Save time and money by making your magazines legal.
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.
- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.
- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal
$19.95 As low as: $18.95 -
STI Staccato P, XC, XL 10/17 126mm Magblock (9mm)
Magblock 10 Round Limiter for STI Staccato 126mm 17 Round 9mm Magazines
- Fits 17 round 9mm Factory Staccato STI P, XC, XL 126 mm magazines.
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below.
$6.95 As low as: $5.95 -
STI Staccato 170mm 10/26 Magblock (9mm)
Magblock 10 Round Limiter for STI 140mm 20 Round 9mm Magazines
- Fits 26 round 9mm Factory STI 170 mm magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.$6.95 As low as: $5.95 -
Magblock Universal Pistol Limiter Kit
Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
Save time and money by making your magazines legal.
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.
- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.
- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal
$6.50 As low as: $5.49 -
Para Ordnance P14 .45 Magblock 10/14
Magblock 10 Round Limiter for Para Ordnance P14 .45 magazines
- Fits 14 round .45 Para Ordnance P14 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.*** Tested on factory Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work.
WILL NOT WORK WITH PRO-MAG PARA14 MAGAZINES$6.50 As low as: $5.95 -
STI Staccato 140mm 10/20 Magblock (9mm)
Magblock 10 Round Limiter for STI 140mm 20 Round 9mm Magazines
- Fits 20 round 9mm Factory STI 140 mm magazines.
- Easy installation into base of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below.
$6.95 As low as: $5.95