Ruger

Ruger P89 and P85/95 Magblock 10 Round Limiter

This Magblock fits theRuger P89 and P85 and P95 15 round magazines and will limit them to 10 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10 round Ruger P89 and P85 Magazines.

-No external modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

Universal Limiter Instructions: If using the Universal limiter to make this cut to #9 in the indicator notch and cement the base. Next the sides of the base will need to be sanded down to fit into the bottom of the magazine. The block sold here is pre cut and sanded. 

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Amend2 Glock 9mm Magblock for 34 Round (9mm) Magazines

- Fits 34 round 9mm Amend2 Glock 17 magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Amend2 Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

ProMag 1911  .45 Magblock

• Fits 15 round ProMag 1911 .45 magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of .45
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Ruger BX-15 Magblock 5 Round Limiters for .22WMR & .17HMR for hunting.

- Fits 15 round .22WMR & .17HMR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 5 rounds of .22WMR & .17HMR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Magblock 10 Round Limiter for Ruger LCP Max (.380 ) 12 Round Magazines

- Fits 12 round .380 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Ruger LCP Max 

Magblock 10 Round Limiter for Ruger Max 9 (9mm) 12 Round Magazines

- Fits 12 round 9mm magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Ruger Max 9. 

Ruger Security-380 Magblock 10 Round Limiter for 15 Round Magazines

This Magblock fits the Ruger Security-380 15 round magazines and will limit them to 10 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired. This block works inconjuntion with the factory spacer from Ruger. Please see pictures for details.

-Simple install to make 10 round Ruger Security .380 Magazines.

-No modification to the magazine is required. The spring bottom can fit into the drilled hole in the limiter or you can bend the spring if desired.

-Lightweight and will not interfere with magazine reliability.

 

Ruger Security 9 Compact, PC Carbine Compact Magblock 5 Round Limiter for 10 Round Magazines

This Magblock fits the Ruger Security 9 Compact, PC Carbine Compact, 10 round magazines and will limit them to 5 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 5 round Ruger Security 9 Compact Magazines for New York City.

-No modification to the magazine is required. The spring bottom will need to be bent so that the block can go into the spring.

-Lightweight and will not interfere with magazine reliability.

 

Ruger American Compact 10/12 Magblock 10 Round Limiter for 12 Round Magazines

This Magblock fits the Ruger American Compact Pistol  9mm, 12 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Ruger American Pistol Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "3" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

Ruger BX-15 Magblock 10 Round Limiters for .22WMR & .17HMR

- Fits 15 round .22WMR & .17HMR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 10 rounds of .22WMR & .17HMR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Ruger American 10/17 Magblock 10 Round Limiter for 17 Round Magazines

This Magblock fits the Ruger American Pistol  9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Ruger American Pistol Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "18" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

Epoxy Fast Setting

Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
Features:
- Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
- Handling strength: 15-30 minutes.
- Color: white.
- Viscosity: honey.
- Full Strength: 24 hours

4.0 Grams.

Epoxy, Machinable Fast Setting.

Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used.
Features a longer working time than the Red fast set epoxy:
- Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
- Handling strength: 4 hours.
- Color: Aluminum.
- Viscosity: Honey.
- Full Strength: 24 hours

3.5 Grams.