FN

Mag Magnet for AR15

ALL NEW and Improved Generation 2 model, using the N52 Neodymium Magnet for strongest hold with 1.3 lb more strength than the original. 
Mag Magnet is a patented product that is magnetized and used with the standard bullet button for California legal AR-15's. Mag Magnet is a true original, don't fall for cheap imitations.

For use with the standard AR-15 platform (.223/5.56mm).
Mag Magnet is not compatible with the Prince 50 or the Raddlock. It only works with the standard Bullet Button™.

Magblock LLC only recommends use of this device out of state or with .22 rimfire conversion kits only.

Leaving Mag-Magnet on a firearm may designate it as an illegal assault weapon in violation of California law. Do not use Mag-Magnet in California on magazines with capacities greater than 10 rounds. It is advised that Mag-Magnet users become familiar with California DOJ requirements and updated interpretations of existing laws and regulations.

Magblock LLC shall not be held responsible in any way for the inappropriate use of the product by the user. User assumes all liabilities and risks associated with ownership and use of this product.

FNP-9 Magblock 10 Round Limiter

- Fits 15 round 9 mm Factory FNP-9 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

FNX-9 Magblock 10 and 15 Round Limiters

- Fits 17 round 9 mm Factory FNX-9 magazines. 
- Easy installation under the follower.
- Limits the magazine to 10 or 15 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

FN 502 (.22LR) Magblock 10 Round Limiter for 15 Round Magazine.

- Fits 15 round FN 502 magazines. 
- Easy installation and allows you to use the stock locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Promag FN Five-Seven Magblock 10 Round Limiter

- Fits 30 round 5.7 mm Promag FN magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

FN510 Tactical 10mm Magblock 10 Round Limiters for 22 Round Magazine

- Fits 22 round 10mm FN510 Tactical 10mm magazines. 
- Limits the magazine to 10 rounds of 10mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory FN510 10mm 22 round magazine

FN510 Tactical 10mm Magblock 10 Round Limiters for 15 Round Magazine

- Fits 15 round 10mm FN510 10mm magazines. 
- Limits the magazine to 10 rounds of 10mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory FN510 10mm 15 round magazine

FN 545 Magblock 10 Round Limiter For 15 Round Magazine

- Fits 15 round .45 Factory FN 545 magazines.
- Must check follower type to determine the correct limiter. 
- Limits the magazine to 10 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*Note: You will have to bend the end of the spring, so that you can insert the block into the spring.

Magblock 10 Round Limiter for FN Hi Power 17 Round Magazines

- Please note that different followers exist for Hi Power magazines. Please see the photos to determine which followers your magazines use so that you can order the correct limiter.

- Fits 17 round 9mm FN Hi Power magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

FN 545 Magblock 10 Round Limiter For 18 Round Magazine

- Fits 18 round .45 Factory FN 545 magazines.
- Must check follower type to determine the correct limiter. 
- Limits the magazine to 10 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*Note: You will have to bend the end of the spring, so that you can insert the block into the spring.

Magblock 10 Round Limiter for FN Reflex 11 Round Magazines

- Fits 11 round 9mm FN Reflex magazines.
- Easy installation under the follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

Promag PS-90, P-90 MAGBLOCK 10/50 MAGAZINE

- New and Improved Easy Install Design.

- This block will fit original 5.7x28mm Promag PS-90, P-90 Magazines made by Promag.

- The block replaces the factory locking plate and will convert 50 round magazines to hold only 10 rounds. 

- The block can be epoxied to the spring for a permanent modification.

*PATENT PENDING*

Magblock 10 Round Limiter for FN Reflex 15 Round Magazines

- Fits 15 round 9mm FN Reflex magazines.
- Easy installation under the follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.