Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

XD and XDM

10 Round Limiters for Springfield XD and XDM Pistol Magazines
Set Ascending Direction

Grid List

  1. MagazineBlocks New Adjustable Universal Pistol Limiter.

    Magblock Universal Pistol Limiter Kit

    Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

    NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. This is a new release product that does not come with any instructions or packaging at this time. A YouTube video is available. We just want to give people the option to use them if we do not have a limiter available for your specific magazine yet with the recent law changes. If they don't work out for you just send them back for a refund minus shipping charges.

    - This Magblock fits many magazines from .380, 9mm, .40, and some .45 magazines.

    - Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use.

    - Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

    - Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower/.

    - No modification to the magazine is required.

    - Lightweight and will not interfere with magazine reliability.

    - Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. We do offer these as an option for some magazines already precut.

    *If you are a return customer and know the exact length needed we can pre-cut them for you. You must know the number that shows in the limiters indicator notch when the adjustable part is flush with the base. See photos on where the notch indicator is found if you are not sure.

  2. Machinable Yellow Pouch Double Bubble Epoxy

    Epoxy Machinable- Fast Set

    Epoxy, Machinable Fast Setting.


    Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used.
    Features a longer working time than the Red fast set epoxy:
    - Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
    - Handling strength: 4 hours.
    - Color: Aluminum.
    - Viscosity: Honey.
    - Full Strength: 24 hours

    3.5 Grams.
    $2.39
  3. Fast Set Epoxy

    Epoxy Fast Setting

    Epoxy Fast Setting


    Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
    Features:
    - Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
    - Handling strength: 15-30 minutes.
    - Color: white.
    - Viscosity: honey.
    - Full Strength: 24 hours

    4.0 Grams.
    $2.39
  4. XD 9mm 15 round limiter for the 16 round magazines.

    Springfield XD 9mm 15 Round Magblock

    Springfield XD 9mm 15 Round Magblock

    • Fits 16 round XD 9mm magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 15 rounds of 9mm.
    • Can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  5. XDM .40 15/16  15 round limiter for 16 round magazines.

    Springfield .40 XDM 15/16 or 10/11Magblock (10 and 15 Round Limiter)

    Springfield XDM .40 Magblock 15 or 10 Round Limiter

    • Fits 16 round XDM .40 magazines to limit to 15 rounds. Can also limit 11 round magazine to 10 Rounds. 
    • Easy installation under the magazine follower.
    • Held in place with spring tension or can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  6. XDM 9mm 15/19 Magblock 15 round limiter. Installs under the follower the same as other XDM limiters.

    Springfield XDM 9mm 15/19 Magblock 15 Round Limiter

    Springfield XDM 9mm Magblock 15 Round Limiter

    - Fits 19 round 9mm XDM magazines. 
    - Limits the magazinbe to 15 rounds of 9mm.
    - Easy installation under the magazine follower.
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

  7. Magblock 10 Round Limiter for Springfield 12 round XD .40 Magazines.

    Springfield .40 XD 10/12 Magblock 10 Round Limiter

    Springfield XD .40 Magblock 10 Round Limiter

    • Fits 12 round XDM .40 magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 10 rounds of .40
    • Held in place with spring tension or can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  8. XDM 10/13 Magazine Capacity Limiter. Fits the 13 round magazine and limits it to hold 10 rounds.

    Springfield XD/XDM Compact 9mm 10/13 Magblock 10 Round Limiter

    Springfield XD and XDM Compact 9mm Magblock

    - Fits 13 round 9mm XD and XDM Compact  magazines. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

  9. 10 Round Limiter for XD and XDM .45

    Springfield .45 XDM XD 10/13 Magblock 10 Round Limiter

    Springfield XDM XD .45 Magblock

    • Fits 13 round XDM and XD .45 magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 10 rounds of .45
    • Held in place with spring tension or can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  10. XD 9mm 10/16 Magblock

    Springfield XD 9mm 10/16 Magblock

    Springfield XD 9mm Magblock

    • Fits 16 round XD 9mm magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 10 rounds of 9mm.
    • Held in place with spring tension or can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  11. XDM .40 10/16 10 round. This product comes pre-cut to the correct size.

    Springfield .40 XDM 10/16 Magblock 10 Round Limiter

    Springfield XDM .40 Magblock 10 Round Limiter

    • Fits 16 round XDM .40 magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 10 rounds of .40
    • Held in place with spring tension or can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  12. XDM 10/19 Magazine Capacity Limiter.

    Springfield XDM 9mm 10/19 Magblock 10 Round Limiter

    Springfield XDM 9mm Magblock

    - Fits 19 round 9mm XDM magazines. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    Springfield XDM 9mm Magblock

Set Ascending Direction

Grid List