Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Glock

10 round limiters for Glock magazines
Set Ascending Direction

Grid List

Page:
  1. 1
  2. 2
  1. Glock extended magazine release.

    Glock Extended Magazine Release

    Glock Extended Magazine Release

    Aids In Fast, Positive Mag Changes

    Drop-in replacement for factory magazine catch has a deeply serrated button that protrudes farther from the frame to ensure positive, fast mag release on the first try. Gives a small but critical performance edge to the practical pistol competition shooter.

    Fits all 9mm, .40 S&W, .357 SIG, and .45 GAP Glocks as an extended release.

    Same length as the factory catch on the G20, 21, 29, and 30, so it can be used as a direct replacement for the original part.

    Here is one of the better YouTube videos that show how to install this part. It's an easy to install upgrade. 

     

    $5.95
  2. Glock Replacement Spring G17

    Glock Magazine Spring for G17, 18, 20, 21, 22, 34, 35

    Glock Magazine Spring 10 Coil Replacements

     

    Compatable with the following magazines: 

    - G17, G18 and G35 17 round magazines.
    - G20 15 round magazines 
    - G21 13 round Pre-Ban & older LE marked mags with follower 3955
    - G21 10 round magazines only.
    - G22, G35 Pre Ban and older LE marked mags.

    $6.50
  3. Glock .45 Limiter for 27 round magazines. 10 round limiter pictured.

    Glock .45 Magblock for 27 Round Magazines

    Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines

    - Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 or 15 rounds of .45
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

    ** Select desired magazine capacity before adding to your cart.

  4. Glock .45 Magblock 10 and 15 round limiters. Fit the Scherer 27 round Glock magazines shown in the photo.

    Glock .45 Magblock for 27 Round Scherer Magazines

    Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines

    - Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 or 15 rounds of .45
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

    ** Select desired capacity below. 

    Patent pending
  5. Glock 19 Older style follower with block shown installed. The arrow on the block points toward the front of the magazine.

    Glock 19 Magblock 10/15 (9mm) for Older Style Follower

    Glock 19 (9mm) Magblock (For Older Style Followers Only)

    - Fits 15 round 9mm Foctory Glock 19 magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
    Only compatable with the follower type shown in the pictures. 

  6. Glock 10 Round limiter for 33 round 9mm magazines

    Glock Magblock for 33 round (9mm) Magazine

    Glock 9mm Magblock for 33 Round (9mm) Magazines

    - Fits 33 round 9mm Foctory Glock 17 magazines and Korean manufacture magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

  7. Glock 9mm Follower

    Glock Follower 9mm

    Glock Follower (9mm) Replaces #4,5,6, & Gen 4

    Replacement Glock 9 mm follower which is compatable with our Magblocks. 

    -Replaces #4,5,6, and Gen 4 magazine followers in 9 mm. 

    $4.50
  8. Glock .45 Follower

    Glock .45 Follower G21

    Glock .45 OEM Replacement Follower

    Replacement Glock .45 follower which is compatible with Magblock Limiters

    - Fits Glock 21 and other .45 Glock Magazines.

    $4.50
  9. Magblock for Pmag 17 GL9 17 Round Magazines. Will limit to 10 rounds. See other photos for installation instructions. Marked "B92 10/17"

    PMAG 17 GL9 Magblock 10/17 (9mm)

    Magblock 10 Round Limiter for Pmag 17 GL9 Magazines.

    - Fits 17 round Magpul Pmag GL9 magazines for Glock 17 and Glock 34;

    - Easy installation at the base of the magazine and sits on top of the locking plate.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits Magpul Pmag 17 GL9 Magazines Only. Will not fit Glock Brand Magazines.

  10. Glock 18 9mm 31 and 33 roound OEM magazine spring replacement.

    Glock Magazine Spring for Glock 9mm 31 and 33 Round Magazines

    Glock OEM 9mm 31 and 33 Round Magazine Spring Replacement

    Compatible with Magblock Limiters

    $8.49
  11. Glock 21 Replacement Spring G21 (13 Round)

    Glock Magazine Spring for G21 .45

    Glock 21 Magazine Spring 10 Coil (13 Round) Replacements

     

    - Fits 13 round Glock 21 magazines

    - Of coarse it works with Magblock limiters.

    $7.99
  12. Glock 20 Magblock 10 round limiter.

    Glock 20 Magblock 10/15 (10 mm)

    Glock 20 (10 mm) Magblock

    - Fits 15 round 10 mm Glock 20 magazines.  *See details on correct follower types below. 
    -Will also fit Korean Glock Magazines.  
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 10mm ammunition. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type shown in the pictures. 

    Patent Pending
  13. Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.

    PMAG 15 GL9 Magblock 10/15 (9mm)

    Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.

    - Fits 15 round Magpul Pmag GL9 magazines for Glock 19.

    - Easy installation at the base of the magazine and sits on top of the locking plate.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits Magpul Pmag 15 GL9 Magazines Only. Will not fit standard Glock type Magazines.

  14. Machinable Yellow Pouch Double Bubble Epoxy

    Epoxy Machinable- Fast Set

    Epoxy, Machinable Fast Setting.


    Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used.
    Features a longer working time than the Red fast set epoxy:
    - Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
    - Handling strength: 4 hours.
    - Color: Aluminum.
    - Viscosity: Honey.
    - Full Strength: 24 hours

    3.5 Grams.
    $2.39
  15. Fast Set Epoxy

    Epoxy Fast Setting

    Epoxy Fast Setting


    Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
    Features:
    - Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
    - Handling strength: 15-30 minutes.
    - Color: white.
    - Viscosity: honey.
    - Full Strength: 24 hours

    4.0 Grams.
    $2.39
Set Ascending Direction

Grid List

Page:
  1. 1
  2. 2