Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Pistols

Set Descending Direction

Grid List

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Beretta 92 Magblock 10 round limiter for factory 17 round magazines. Please see other photos for install.

    Beretta 92 Magblock 10 Round Limiter 10/17 (9mm)

    Beretta 92 Magblock 10/17 (9mm) 10 Round Limiter

    This Magblock fits the factory Beretta 92 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

    - Simple install to make 10/17 Beretta 92 magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

    *Please click on photos for installation instructions. 

  2. Beretta PX4 Magblock 10 round limiter for 13 round magazines. The arrow points towards the front of the magazine and installs under the follower.

    Beretta PX4 Magblock 10 Round Limiter 10/13 (9mm)

    Beretta PX4 Magblock 10/13 (9mm) 10 Round Limiter

    This Magblock fits the factory Beretta PX4 13 round 9mm magazines and will limit them to 10 rounds.  Installs under the follower as seen in the photos. It is held in place with spring tension alone or can be glued or epoxied if desired. 

    - Quick install to make 10/13 Beretta PX4 magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory 13 round Beretta PX4 magazines as seen in the photos. 

    *Please click on photos for installation instructions. The block may be difficult to epoxy to the follower straight. Where permanent modification is required, pinning or sealing the floor plate may work better. 

  3. Sig P226 Magblock 10 Round Limiter for factory 15 round magazines.

    Sig Sauer P226 Magblock 10/15 (9mm)

    Magblock 10 Round Limiter for Sig P226 15 Round Magazines

    - Fits 15 round 9mm Factory Sig P226 magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

    *Compatibility Note: This limiter will NOT fit US made/marked Sig P226 magazines. This limiter will only fit Italian made/marked magazines.
  4. Magblock 10 Round Limiter for Springfield 12 round XD .40 Magazines.

    Springfield .40 XD 10/12 Magblock 10 Round Limiter

    Springfield XD .40 Magblock 10 Round Limiter

    • Fits 12 round XDM .40 magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 10 rounds of .40
    • Held in place with spring tension or can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  5. XDM 9mm 15/19 Magblock 15 round limiter. Installs under the follower the same as other XDM limiters.

    Springfield XDM 9mm 15/19 Magblock 15 Round Limiter

    Springfield XDM 9mm Magblock 15 Round Limiter

    - Fits 19 round 9mm XDM magazines. 
    - Limits the magazinbe to 15 rounds of 9mm.
    - Easy installation under the magazine follower.
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

  6. Glock 23 Limiter. 10 round limiter for 13 round .40 Glock Magazines.

    Glock 21 Magblock 10/13 (.45)

    Glock 21 (.40) Magblock

    - Fits 13 round .45 caliber Glock 21 magazines.  *See details on correct follower types below. 
    -Will also fit Korean Glock Magazines.  
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of .45 caliber ammunition. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatible with the follower type shown in the pictures. 

  7. Sig Sauer 2022 and 2009 10 Round Limiter.

    Sig Sauer 2022 Magblock 10/15 (9mm)

    Magblock 10 Round Limiter for Sig Sauer 2022 SigPro 9mm 15 Round Magazines. Fits 2022 and 2009

    - Fits 15 round 9mm Factory Sig Pro magazines. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  8. Glock 10 Round limiter for 33 round 9mm magazines

    Glock Magblock for 33 round (9mm) Magazine

    Glock 9mm Magblock for 33 Round (9mm) Magazines

    - Fits 33 round 9mm Foctory Glock 17 magazines and Korean manufacture magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

  9. XD 9mm 10/16 Magblock

    Springfield XD 9mm 10/16 Magblock

    Springfield XD 9mm Magblock

    • Fits 16 round XD 9mm magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 10 rounds of 9mm.
    • Held in place with spring tension or can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  10. 10 Round Limiter for XD and XDM .45

    Springfield .45 XDM XD 10/13 Magblock 10 Round Limiter

    Springfield XDM XD .45 Magblock

    • Fits 13 round XDM and XD .45 magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 10 rounds of .45
    • Held in place with spring tension or can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  11. XDM 10/13 Magazine Capacity Limiter. Fits the 13 round magazine and limits it to hold 10 rounds.

    Springfield XD/XDM Compact 9mm 10/13 Magblock 10 Round Limiter

    Springfield XD and XDM Compact 9mm Magblock

    - Fits 13 round 9mm XD and XDM Compact  magazines. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

  12. Glock 10/17 Magblock 10 Round Limiter. These can be modified to fit all other Glock 9mm and .40 magazines. Pre-cut limiters available.

    Glock 17 and 34 Magblock 10/17 (9mm)

    Glock 17 and Glock 34 (9mm) Magblock

    - Fits 17 round 9mm Foctory Glock 17 and Glock 34 magazines.  *See details on correct follower types below. 
    -Will also fit Korean Glock Magazines.  
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatible with the follower type shown in the pictures. 

    New patent pending design allows this limiter to be adapted to fit all other Glock 9mm and .40 magazines including a 15 round option for the Glock 17 magazine. Cutting using an appropriate tool is required. Pre-cut limiters are available.

  13. S&W M&P 10/17 Magblock 10 Round Limiter

    Smith & Wesson M&P 9mm Magblock (10 and 15 Round Limiters)

    Smith & Wesson M&P 9mm Magblock 10 and 15 Round Limiters

    - Fits 17 round 9mm M&P magazines. 
    - New design installs at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. - Tested with factory S&W and Promag Magazines.

    *Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

  14. Glock 19 (10/15) Magblock 10 Round Limiter

    Glock 19 Magblock 10/15 (9mm)

    Glock 19 (9mm) Magblock

    - Fits 15 round 9mm Foctory Glock 19 magazines.  *See details on correct follower types below. 
    -Will also fit Korean Glock Magazines.  
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatible with the follower type shown in the pictures. 

  15. Glock 22 (10/15) Magblock 10 Round Limiter. Comes pre-cut to the correct size.

    Glock 22 and 35 Magblock 10/15 (.40)

    Glock 22 (.40) Magblock

    - Fits 15 round .40 caliber Glock 22magazines.  *See details on correct follower types below. 
    -Will also fit Korean Glock Magazines.  
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of .40 caliber ammunition. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type shown in the pictures. 

Set Descending Direction

Grid List

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6