Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Pistols

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Sig MPX 10 Round Limiter replaces the original locking plate. An insert into the follower provides a level surface to engage the lower limiter. This insert must be epoxied into the follower. Shown here already secured in place. See other photos for more d

    Sig Sauer MPX Magblock 10/30 (9mm)

    Magblock 10 Round Limiter for Sig MPX 9mm 30 Round Magazines

    - Fits 30 round 9mm Sig MPX factory magazines.
    - Easy installation. 2 part limiter replaced the original locking plate and includes a follower insert.
    - Limits the magazine to 10 rounds of 9mm
    - Held in place with spring tension or can be epoxied for a permanent modification. (Follower insert requires epoxy or silicone to securely hold in place).
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.
     


  2. Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.

    PMAG 15 GL9 Magblock 10/15 (9mm)

    Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.

    - Fits 15 round Magpul Pmag GL9 magazines for Glock 19.

    - Easy installation at the base of the magazine and sits on top of the locking plate.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits Magpul Pmag 15 GL9 Magazines Only. Will not fit standard Glock type Magazines.

  3. Beretta 92 Magblock 10 round limiter for factory 15 round magazines.  The block installs from the bottom of the spring. The metal locking plate sits under the block. Slide the floor plate closed as normal.

    Beretta 92 Magblock 10 Round Limiter 10/15 (9mm)

    Beretta 92 Magblock 10/15 (9mm) 10 Round Limiter

    This Magblock fits the factory Beretta 92 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

    - Simple install to make 10/15 Beretta 92 magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory "Made in Italy" Beretta 92 magazines as seen in the photos. Other types of magazines may require modification of the limiter.

    *Please click on photos for installation instructions.

  4. Installation of the S&W M&P-22 10 round limiter is simple. Just replace the 12 round locking plate with this custom 10 round locking plate.

    Smith & Wesson M&P22 Magblock 10/12 (.22LR)

    Smith & Wesson M&P22 (.22LR) Magblock 10 Round Limiter

    - Fits 12 round .22 M&P-22 magazines. 
    - Easy installation by replacing the locking plate. See photos.
    - Limits the magazine to 10 rounds of .22 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    *Please click on photos for installation instructions. 

  5. Magblock 10 Round Limiter for the Sig P250 17 round 9 mm magazines.

    Sig Sauer P320/P250 Magblock 10/17 Limiter (9mm)

    Magblock 10 Round Limiter for Sig P320 17 Round Magazines

    - Fits 17 round 9mm Factory Sig P320 and P250 magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  6. Installs at the base of the magazine. Can be epoxied or the floor plate glued closed for a permanent modification.

    Sig Sauer P320/P250 Compact Magblock 10/15 Limiter (9mm)

    Magblock 10 Round Limiter for Sig P320 and P250 Compact 15 Round Magazines

    - Fits 15 round 9mm Factory Sig P320/P250 Compact magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  7. Sig P320 .40 Magblock 10 Round Limiter for factory 13 round magazines.  (Note: This is the same block as a 9mm 10/15 Limiter)

    Sig Sauer P320 (.40) Magblock 10/13

    Magblock 10 Round Limiter for Sig P320 (.40) 13 Round Magazines

    - Fits 13 round .40 Sig P320 factory magazines.
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of .40 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.
      *** *Compatibility Note: This is the same block as a Sig P228 9mm 10/13 Limiter and may be marked as such***


  8. Magblock 10 Round Limiter for the Sig P250 17 round 9 mm magazines.

    Canik TP9 Magblock 10/17 Limiter (9mm)

    Magblock 10 Round Limiter for Sig P320 17 Round Magazines

    - Fits 17 round 9mm Factory Sig P320 and P250 magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

    -Tested on factory Canik TP9 magazines.The block may need to be modified to work with magazines from other manufactures.

    *Compatibility Note: This limiter will also fit the Sig P320 and Sig P250 17 round magazines and limit them to 10 rounds.

    .
  9. Works in original factory magazines with this type of follower. Taurus PT92 and PT99 Magblock 10 round limiter for factory 17 round magazines.

    Taurus PT92/PT99 Magblock 10 Round Limiter 10/17 (9mm)

    Taurus PT92 and PT99 Magblock 10/17 (9mm) 10 Round Limiter

    This Magblock fits the factory Taurus PT92 and PT99 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds under the follower. It is held in place with spring tension alone or can be glued or epoxied if desired.

    - Simple install to make 10/17 Taurus PT92 and PT99 magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Taurus PT92/PT99 magazines as shown in the photos. Other types of magazines may require modification of the limiter.

    Please click on photos for installation instructions.

  10. Magblock for Pmag 17 GL9 17 Round Magazines. Will limit to 10 rounds. See other photos for installation instructions. Marked "B92 10/17"

    PMAG 17 GL9 Magblock 10/17 (9mm)

    Magblock 10 Round Limiter for Pmag 17 GL9 Magazines.

    - Fits 17 round Magpul Pmag GL9 magazines for Glock 17 and Glock 34;

    - Easy installation at the base of the magazine and sits on top of the locking plate.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits Magpul Pmag 17 GL9 Magazines Only. Will not fit Glock Brand Magazines.

  11. Magblock 10 Round Limiter for the Sig P250 17 round 9 mm magazines.

    Sig Sauer P320/P250 Magblock 10/21 Limiter (9mm)

    Magblock 10 Round Limiter for Sig P320 21 Round Magazines

    - Fits 21 round 9mm Factory Sig P320 and P250 magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  12. Beretta 84 Magblock 10 Round Limiter. Limits 13 round .380 magazines to 10 rounds.

    Beretta 84 Magblock 10 Round Limiter 10/13 (.380)

    Beretta 84 Magblock 10/13 (.380) 10 Round Limiter

    This Magblock fits the factory Beretta 84 13 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

    - Simple install to make 10/13 Beretta 84 magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Beretta 84 magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 

    *Please click on photos for installation instructions. 

  13. Magblock 10 Round Limiter for Ruger P89

    Ruger P89 Magblock 10/15 (10 Round Limiter)

    Ruger P89 Magblock 10 Round Limiters

    - Fits 15 round 9mm Factory Ruger P89 magazines as shown.
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.

  14. Glock 19 Older style follower with block shown installed. The arrow on the block points toward the front of the magazine.

    Glock 19 Magblock 10/15 (9mm) for Older Style Follower

    Glock 19 (9mm) Magblock (For Older Style Followers Only)

    - Fits 15 round 9mm Foctory Glock 19 magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
    Only compatable with the follower type shown in the pictures. 

  15. S&W 5906 10 Round Magazine Capacity Limiter

    Smith & Wesson 5906 Magblock 10/15 (9mm)

    Smith & Wesson 5906 (9mm) Magblock 10 Round Limiter

    - Fits factory 15 round 9mm 5906 magazines. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    *Please click on photos for installation instructions. 

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5