Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Pistols

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Magblock 10 Round Limiter for the Sig P250 17 round 9 mm magazines.

    Sig Sauer P250 Magblock 10/17 Limiter (9mm)

    Magblock 10 Round Limiter for Sig P250 17 Round Magazines

    - Fits 17 round 9mm Factory Sig P250 magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  2. Magblock 10/13 Limiter for Browning Hi Power Magazines. Please see photos to determine which follower type your magazine use.

    Hi Power Magblock 10/13 Limiter

    Magblock 10 Round Limiter for Browning Hi Power 13 Round Magazines

    - Please note that different followers exist for Hi Power magazines. Please see the photos to determine which followers your magazines use so that you can order the correct limiter.

    - Fits 13 round 9mm Hi Power magazines.
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm.
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  3. Magblock 10 Round Limiter for Browning Hi Power 15 Round Magazines Manufactured by Mec Gar.

    Hi Power Magblock 10/15 Limiter (Mec Gar)

    Magblock 10 Round Limiter for Browning Hi Power 15 Round Magazines made by Mec Gar

    - Only for use in the magazine type pictured.

    - Fits 15 round 9mm Hi Power magazines by Mec Gar.
    - Easy installation under the follower.
    - Limits the magazine to 10 rounds of 9mm.
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  4. Magblock 10 Round Limiter for Browning Hi Power 20 Round Magazines.

    Hi Power Magblock 10/20 Limiter

    Magblock 10 Round Limiter for Browning Hi Power 20 Round Magazines

    - Please note that different followers exist for Hi Power magazines. Please see the photos to determine which followers your magazines use. Only for use with the follower type shown. Modification would be required for other follower types.

    - Fits 20 round 9mm Hi Power magazines.
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm.
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  5. Magblock 10 Round Limiter for CZ75 SP01 .40 12 Round Magazines.

    CZ-75 Magblock 10/12 Limiter (.40)

    Magblock 10 Round Limiter for CZ-75 (.40) 12 Round Magazines

    - Fits 12 round .40 CZ-75 SP-01 magazines
    - Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .40 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design.
    - Made of a super strong, heat resistant, fiber reinforced polymer.
    - Tested on CZ-75 magazines made by Mec-Gar as shown in the photos. Has also been reported to work with factory magazines. The block may need to be modified to work with magazines from other manufactures.

  6. Magblock 10 Round Limiter for 20 Round Sig Sauer P226 Magazines. Please see the photos to be sure your magazines are the same.

    Sig Sauer P226 Magblock 10/20 (9mm)

    Magblock 10 Round Limiter for Sig P226 20 Round Magazines

    - Fits 20 round 9mm Sig P226 US made magazines as pictured
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  7. Glock 20 Magblock 10 round limiter.

    Glock 20 Magblock 10/15 (10 mm)

    Glock 20 (10 mm) Magblock

    - Fits 15 round 10 mm Glock 20 magazines.  *See details on correct follower types below. 
    -Will also fit Korean Glock Magazines.  
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 10mm ammunition. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type shown in the pictures. 

    Patent Pending
  8. MagazineBlocks New Adjustable Universal Pistol Limiter.

    Magblock Universal Pistol Limiter Kit

    Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

    NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. This is a new release product that does not come with any instructions or packaging at this time. A YouTube video is available. We just want to give people the option to use them if we do not have a limiter available for your specific magazine yet with the recent law changes. If they don't work out for you just send them back for a refund minus shipping charges.

    - This Magblock fits many magazines from .380, 9mm, .40, and some .45 magazines.

    - Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use.

    - Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

    - Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower/.

    - No modification to the magazine is required.

    - Lightweight and will not interfere with magazine reliability.

    - Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. We do offer these as an option for some magazines already precut.

    *If you are a return customer and know the exact length needed we can pre-cut them for you. You must know the number that shows in the limiters indicator notch when the adjustable part is flush with the base. See photos on where the notch indicator is found if you are not sure.

  9. Sig P320 .40 Magblock 10 Round Limiter for factory 13 round magazines.  (Note: This is the same block as a 9mm 10/15 Limiter)

    Sig Sauer P320 (.40) Magblock 10/14

    Magblock 10 Round Limiter for Sig P320 (.40) 13 Round Magazines

    - Fits 14 round .40 Sig P320 factory magazines.
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of .40 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.
      *** *Compatibility Note: This is the same block as a Sig P226 9mm 10/15 Limiter and may be marked as such***


  10. Sig Sauer 550 Magblock 10/30

    Sig Sauer 550 Magblock 10/30

    Magblock 10 Round Limiter for Sig MPX 9mm 30 Round Magazines

    - Fits 30 round 5.56mm Sig 550 factory magazines.
    - Easy installation. limiter replaces the original locking plate.
    - Limits the magazine to 10 rounds of 5.56mm
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design. 
    - Made of a ABS plastic.
     


  11. CZ-75 Magblock 10 Round Limiter for 19 round magazines

    CZ-75 Magblock 15/19 Limiter (9mm)

    Magblock 15 Round Limiter for CZ-75 19 Round and 18 Round Magazines

    - Fits 19 round 9mm CZ-75 SP-01 magazines
    - ***Reported to work with factory 18 round magazines also, may need to be slightly shortened for all 15 rounds in some if these magazines.
    - Limits the magazine to 15 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  12. Installs at the base of the magazine. Can be epoxied or the floor plate glued closed for a permanent modification.

    Sig Sauer P320/P250 Subcompact Magblock 10/12 Limiter (9mm)

    Magblock 10 Round Limiter for Sig P320 and P250 Subcompact 12 Round Magazines

    - Fits 12 round 9mm Factory Sig P320/P250 Subcompact magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  13. CZ Scorpion Evo Magblock 10/20 (9mm)

    CZ Scorpion Evo Magblock 10/20 (9mm)

    Magblock 10 Round Limiter for CZ Scorpion Evo (9mm) 20 Round Magazines

    - Fits 20 round 9mm CZ Scorpion Evo magazines
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  14. CZ Scorpion Evo Magblock 10/30 (9mm)

    CZ Scorpion Evo Magblock 10/30 (9mm)

    Magblock 10 Round Limiter for CZ Scorpion Evo (9mm) 30 Round Magazines

    - Fits 30 round 9mm CZ Scorpion Evo magazines
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  15. STI 140mm 9mm 10/20 Magblock 10 Round Limiter

    Para Ordnance P14 .45 Magblock 10/14

    Magblock 10 Round Limiter for Para Ordnance P14 .45 magazines

    - Fits 14 round .45 Para Ordnance P14 magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of .45. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5