Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Pistols

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. XDM 10/19 Magazine Capacity Limiter.

    Springfield XDM 9mm 10/19 Magblock 10 Round Limiter

    Springfield XDM 9mm Magblock

    - Fits 19 round 9mm XDM magazines. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    Springfield XDM 9mm Magblock

  2. Machinable Yellow Pouch Double Bubble Epoxy

    Epoxy Machinable- Fast Set

    Epoxy, Machinable Fast Setting.


    Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used.
    Features a longer working time than the Red fast set epoxy:
    - Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
    - Handling strength: 4 hours.
    - Color: Aluminum.
    - Viscosity: Honey.
    - Full Strength: 24 hours

    3.5 Grams.
    $2.39
  3. STI 140mm 9mm 10/20 Magblock 10 Round Limiter

    STI Magblock 10/20 (9mm) for 140mm Magazine

    Magblock 10 Round Limiter for STI 140mm 20 Round 9mm Magazines

    - Fits 20 round 9mm Factory STI 140 mm magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  4. CZ P-07 9mm 10 round limiter

    CZ P-07 Magblock 10/15 (9mm)

    Magblock 10 Round Limiter for CZ P-07 (9mm) 15 Round Magazines

    - Fits 15 round 9mm CZ P-07 magazines
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

    -**Please Note that this is the same limiter as the Sig P226 10/15 and may be marked "Sig 226". Will also work as aTangfolio .40 10/14 limiter.

  5. CZ P-09 10 Round Limiter for 19 Round Magazines

    CZ P-09 Magblock 10/19 (9mm)

    Magblock 10 Round Limiter for CZ P-09 (9mm) 19 Round Magazines

    - Fits 19 round 9mm CZ P-09 magazines
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  6. Sig P226 X-Five 10 Round Limiter for 18 Round Magazines. Installs easily in the spring as shown. Only includes the limiter. Other magazine parts not included. Please Note: Limiter marked "B92 10/17".

    Sig Sauer P226 X-Five Magblock 10/18 (9mm)

    Magblock 10 Round Limiter for Sig P226 18 Round Magazines

    This Magblock fits the Sig P226 X-Five 18 round magazines (With aluminum addition as shown) made by Mec-Gar and will limit them to 10 rounds.

    - Easy installation at the base of the spring.

    - Limits the magazine to 10 rounds of 9mm.

    - Held in place with spring tension or can be epoxied for a permanent modification.

    - Lightweight, efficient design.

    - Made of a super strong, heat resistant, fiber reinforced polymer.

    Please Note: Limiter is marked "B92 10/17". Please make sure your magazines use the same follower as shown in the photos.

  7. Sig P228 M11 and P229-1 Magblock 10 Round Limiter

    Sig Sauer P228 M11-A1 (E2) Magblock 10/15 (9mm)

    Magblock 10 Round Limiter for Sig 15 Round P228 M11-A1 and P229-1 Magazines. 
    Fits the Sig P228 M11-A1

    - Fits the new 15 round 9mm Factory Sig P228 M11-A1 and P229-1 magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  8. Magblock 15 Round Limiter for CZ-75 17 Round Magazines

    CZ-75 Magblock 15/17 (9mm 15 Round Limiter)

    Magblock 15 Round Limiter for CZ-75 17 Round 9 mm Magazines

    - Fits 17 round 9mm CZ-75 magazines
    - Easy installation at the base of the spring.
    - Limits the magazine to 15 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  9. Magblock 10 Round Limiter for the Walther P99 15 round 9mm magazines.

    Walther P99 Magblock 9mm 10/15 (10 Round Limiter)

    Walther P99 and PPQ Magblock 10 Round Limiters

    - Fits 15 round 9mm Factory Walther P99 and PPQ magazines as shown.
    - Easy installation under the follower as shown.
    - Limits the magazine to 10 rounds of 9mm
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.

  10. Fast Set Epoxy

    Epoxy Fast Setting

    Epoxy Fast Setting


    Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
    Features:
    - Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
    - Handling strength: 15-30 minutes.
    - Color: white.
    - Viscosity: honey.
    - Full Strength: 24 hours

    4.0 Grams.
    $2.39
  11. CZ75 10 Round Limiter by Magblock

    CZ-75 Magblock 10/14 Limiter (.40)

    Magblock 10 Round Limiter for CZ-75 (.40) 14 Round Magazines

    - Fits 14 round .40 CZ-75 SP-01 magazines using extended floor plate.
    - Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .40 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design.
    - Made of a super strong, heat resistant, fiber reinforced polymer.
    - Tested on CZ-75 magazines made by Mec-Gar as shown in the photos. Has also been reported to work with factory magazines. The block may need to be modified to work with magazines from other manufactures.

  12. Magblock 10 Round Limiter for CZ75 SP01 .40 12 Round Magazines.

    CZ-75 Magblock 10/12 Limiter (.40)

    Magblock 10 Round Limiter for CZ-75 (.40) 12 Round Magazines

    - Fits 12 round .40 CZ-75 SP-01 magazines
    - Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .40 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design.
    - Made of a super strong, heat resistant, fiber reinforced polymer.
    - Tested on CZ-75 magazines made by Mec-Gar as shown in the photos. Has also been reported to work with factory magazines. The block may need to be modified to work with magazines from other manufactures.

  13. Beretta 84 Magblock 10 Round Limiter. Limits 13 round .380 magazines to 10 rounds.

    Beretta 84 Magblock 10 Round Limiter 10/13 (.380)

    Beretta 84 Magblock 10/13 (.380) 10 Round Limiter

    This Magblock fits the factory Beretta 84 13 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

    - Simple install to make 10/13 Beretta 84 magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Beretta 84 magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 

    *Please click on photos for installation instructions. 

  14. Beretta 92 Limiter for 30 round magazines. Easily convert 30 round magazines to 10 rounds. Fits factory Beretta 30 round magazines as shown.

    Beretta 92 Magblock 10 Round Limiter for 30 Round Magazine 10/30 (9mm)

    Beretta 92 Magblock 10/30 (9mm) 10 Round Limiter

    This Magblock fits the factory Beretta 92 30 round 9mm magazines and will limit them to 10 rounds.  Easily installed under the follower. It is held in place with spring tension alone or can be glued or epoxied if desired.

    - Simple install to make 10/30 Beretta 92 magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

    *Please click on photos for installation instructions. 

  15. Magblock 10 round limiter for ProMag 20 round Beretta 92 magazines.

    Beretta 92 Magblock 10 Round Limiter 10/20 (ProMag 9mm)

    Beretta 92 Magblock 10/20 (9mm) 10 Round Limiter for ProMag 20 Round Magazines.

    This Magblock fits the ProMag Beretta 92 (20 round) 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is not used. It is held in place with spring tension alone or can be glued or epoxied if desired.

    - Simple install to make 10/20 Beretta 92 magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on Promag Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

    *Please click on photos for installation instructions. 

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5