Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

10 Round

10 round magazine capacity limiters for many popular AR style rifle magazines. We manufacture the original Magblock Pmag limiter, but also have options available for USGI magazines, Lancer, Troy,Promag, Thermold, C-Products, ACS, Colt, and many more.
Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  1. Sale
    Pmag Gen 2 MOE 10/30 Magblock 10 Round Limiter

    Pmag Gen 2 MOE 10/30 Magblock 10 Round Limiter

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Will also fit 30 round Emags. 

    - Compatable with original Pmags and "M" Series only.  These will not work without modifications in Gen 3 or M3 Pmags. We will have another product set up to buy pre-trimmed M3 blocks. Here are instructions on how to trim blocks to work with Gen M3 Pmags:   http://www.calguns.net/calgunforum/showpost.php?p=9787410&postcount=261

    Regular Price: $5.95

    Special Price $4.95

    As low as: $3.95
  2. Troy BattleMag 10/30 Magblock

    Troy BattleMag 10/30 Magblock

    Troy BattleMag 10/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.

    - This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 10 rounds.

    - The optional shock absorbing floor plate will still function normally.

    - Does not affect reliability.

    - No increase in spring pressure or wear. 

    (Note: This is a custom trimmed Pmag block)

  3. Lancer 10/20 Magblock

    Lancer L5 10/20 Magblock

    Lancer L5 10/20 MCL (Magazine Capacity Limiter) for 20 round Advanced Warfighter L5 magazines in .223/5.56mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

    - Only fits L5 Advanced Warfighter with slide on base. Will not fit older L5 magazines.

    - Does not affect reliability.

    - No increase in spring pressure or wear. 

    (Note: This is a custom modified Pmag block)

  4. Tapco AR 10/30 Magblock

    Tapco AR .223 /5.56mm 10/30 Block

    Tapco Intrafuse AR-15 Magblock

    - Magblock 10/30 MCL block for use in polymer Tapco Intrafuse AR-15 magazines.

    - This block will convert a 30 round magazine to hold only 10 rounds. 

    - The block replaces the lower Tapco locking plate.

    NOTE: The Tapco follower must be modified like in the picture to hold all 10 rounds. 

  5. Sale
    Gen M3 Magblock 10/30

    GEN M3 Pmag MCL 10/30 Block ***NEW*** 10 Round Limiter

    10 Round Limiter for Gen M3 30 Round Pmags

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags. Can NOT be snapped down to fit 20 round Gen M3 Pmags. Please order pre-trimmed blocks for your 20 round Gen M3 Magazines.

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.75
  6. Sale
    PMAG MCL 10/20 Block

    GEN M3 PMAG 10/20 Magblock***NEW***10 Round Limiter

    Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Gen M3 Pmags in .223/5.56mm.

    - Fits NEW Gen M3 Pmag 20  (Curved body)

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed in most rifles. Some trimming of the limiter may be required for this.

    - Does not affect reliability.

    - No increase in spring pressure. 

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  7. Lancer 10/30 Magblock

    Lancer L5 10/30 Magblock

    Lancer L5 10/30 MCL (Magazine Capacity Limiter) for 30 round Lancer L5 Advanced WarFighter magazines in .223/5.56mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - Only fits L5 Advanced Warfighter with slide on base. Will not fit older L5 magazines.

    - Does not affect reliability.

    - No increase in spring pressure or wear. 

    (Note: This is a custom modified Pmag block)

  8. Sale
    USGI 10/30 MCL

    USGI AR15 MCL 10/30 Limiter

    Magblock 10/30 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines

    - For use in USGI type 30 round magazines for the AR15/M16. 
    - Will also fit SCAR 16 GI Magazines.
    - These blocks will convert a 30 round magazine to hold only 10 rounds.
    - Works great Magpul anti-tilt followers.
    - Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

    -Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

    - See our FAQ section for details about using with Magpul Ranger Plates and L-Plates. http://www.magazineblocks.com/magento/faq 
    We have found two different methods that can be used for USGI Ranger Plates and L-Plates. We have added custom options below to buy with the bottom locking tab still in place (Method #1), or converted for use with both parts of the Ranger/L-plate as Magpul intended. You can also convert them yourself using the pictures in the FAQ section as a guide. 

    Regular Price: $5.95

    Special Price $4.95

    As low as: $3.95
  9. Sale
    Colt 10-20 Magblock

    Colt USGI 10/20 block

    Colt USGI 10/20 MCL Magblock

    For use in ONLY Colt 20 round magazines. (See USGI 10/20 for other types of USGI magazines.)

    -This block will attach to the bottom of the spring and convert 20 round magazines to hold only 10 rounds.

    -COLT  USGI magazines use a modified 10/20 USGI block which has been trimmed and an adapter plate plastic welded on.

    -Requires no magazine modifications. 

    Regular Price: $6.25

    Special Price $5.50

    As low as: $4.25
  10. Sale
    PMAG MCL 10/20 Block

    PMAG 20 MCL 10/20 Magblock 10 Round Limiter (Straight Body Gen 2)

    Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm Gen M2 Only. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Fits Gen 2 Pmag 20 only (Straight body)

    Regular Price: $5.95

    Special Price $4.49

    As low as: $3.50
  11. The Magblock 10 round limiter for the new Gen M3 LR20 Pmag is ease to install.

    Pmag LR 20 Magblock (.308) Gen M3 (5,10 & 15 Round Limiters)

    Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)

    Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install. Video instructions available under the FAQ Video link. Attaches to the original locking plate with an included screw. No need to drill any holes. Only a screw driver is needed to install

    - Will NOT fit older version magazines. Gen M3 Only.

    - Dust covers still fit with 10 rounds loaded.

    - Load magazines on a closed bolt in most rifles.

    - Easy to install.

    - Includes required screw.

    - No external magazine modifications.

  12. Promag 10/30 Magblock for Polymer magazines.

    Steyr AUG 10/30 Magblock 10 Round Limiter

    10 Round Limiter for Steyr AUG 30 Round Polymer Magazines

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Steyr AUG 30 round polymer magazines in .223/5.56mm.

    - This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - Customized base of the Magblock includes two locking points just like the original locking plate.

    - Does not affect reliability.

    - No increase in spring pressure.

  13. HK416 22LR 10 round limiter. Works with the pictured magazines.

    HK416 22LR 10/30 Magblock

    HK416 22LR 10/30 Magblock 10 Round Limiter

    - This block will convert 30 round HK 416 22LR magazines into a 10 round magazine.

    - Easy to install without damage to your magazines.

  14. M&P15 .22  10/25 Magblock

    M&P15 .22 10/25 Magblock

    M&P15 .22LR 10/25 Magblock 10 Round Limiter

    - This block will convert 25 round M&P15 .22LR magazines into a 10 round magazine.

    - Easy to install without damage to your magazines.

    - Replaces the original locking plate.

  15. The Magblock 10 round limiter for the Pmag 6.8 mm 30 round magazines includes a limiter and lower spacer that replaces the red locking plate. Easy to install to make a 10 round magazine.

    Pmag 6.8 mm Six8 10/30 Magblock 10 Round Limiter

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round 6.8 mm "Six8" Pmags for LWRC.

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - Includes a spacer for the proper height in the 6.8 mm magazine.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - *Compatible with Pmag 6.8 mm Magazines Only

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3