Magblocks
Magazine Capacity Limiters also known as Magblocks for multiple rifles and pistol magazines.
-
Palmetto PSA AK-V, AR-V Magblock 10/35 (9mm)
Magblock 10 & 15 Round Limiter for Palmetto PSA AK-V, AR-V 9mm 35 Round magazine
- This block fits the new Palmetto PSA AK-V and AR-V 9mm magazines and will convert them to hold 10 and 15 rounds.
-Installs at the base and is held in place by spring tension.
- Made of super strong heat resistant polymer.
-This block is compatiable with the Palmetto PSA AK-V U9 35 round magazines.
$7.49 As low as: $5.95 -
Springfield Hellcat Pro 10/15 Magblock (9mm)
Springfield Hellcat 9mm 10/15 Magblock
- Fits 15 round 9mm Hellcat Compact magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.Note: Please verify which number is showing under the follower of your magazine. If the number reads #4 or #3 then you'll need a special cut Hellcat block. If it reads any other number, then you can use the standard cut block.
$6.50 As low as: $5.95 -
Rock Island M1911 XT-22 Magnum Magblock 10/14 (.22WMR)
Armscor/RIA XT-22 Magnum (.22WMR) Magblock 10 Round Limiter for 14 Round Magazine.
- Fits 14 round Armscor/Rock Island Armory XT-22 magnum magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22magnum
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
X-Products X-14. M1A, M14 Magblock 10/50 (7.62x51)
Magblock 10/50 MCL (Magazine Capacity Limiter) for X-Products X-14 HXP 50 round Drum in 7.62x51/.308.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability
- No increase in spring pressure
- Easy to install, see the video.$14.95 -
Marlin Camp 9 Magblock 10/12 Limiter (9mm)
Magblock 10 Round Limiter for Marlin Camp 9 (9mm) 12 Round Magazines
- Fits 12 round 9mm Marlin Camp 9 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer.$6.50 As low as: $5.95 -
FN PS90 Magblock 10/30 (5.7x28)
FN PS90 MAGBLOCK FACTORY 10/30 MAGAZINE
- New and Improved Easy Install Design.
- This block will fit original 5.7x28mm FN PS90 Magazines made by FNH and some aftermarket magazines as well.
- The block replaces the factory locking plate and will convert 30 round magazines to hold only 10 rounds. (No Need for Factory Block)
- No modifications to your expensive FN PS90 magazines are needed to install.
- The block can be epoxied to the spring for a permanent modification.
*PATENT PENDING*
$10.95 As low as: $8.95 -
Taran Tactical +3 Glock 17 and 34 Magblock 10/20 (9mm) (TTI)
Taran Tactical +3 Extension Glock 17 and Glock 34 (9mm) Magblock
- Fits 20 round 9mm Glock 17 and Glock 34 Magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.95 As low as: $6.50 -
Nemo Arms Omen Magnum 5/14 Magblock (.300 Win Magnum)
Nemo Arms Omen Magnum .300 Winchester Magnum Magblock 5/14
Fits Nemo Arms Omen Magnum 14 round magazines and will convert them to hold only 5 rounds for hunting.
- No need to drill any holes.
- Load magazines on a closed bolt.
- Easy to install.
- No external magazine modifications.
$6.95 As low as: $5.95 -
Taurus TX-22 Magblock 10/16 (.22LR)
Taurus TX-22 (.22LR) Magblock 10 Round Limiter for 16 Round Magazine.
- Fits 16 round Taurus TX-22 magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
Springfield XD 10/15 Magblock (9mm)
Springfield XD 9mm 10/15 Round Magblock
- Fits 15 round XD and XD Mod 2 9mm magazines.
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Can be epoxied for a permanent modification.
- Lightweight, efficient design.
*This block is designed for the factory 15 round magazine, made by Springfield. Will not work on Promag XD magazines.
$6.50 As low as: $5.95 -
Browning BAR 10/20 Magblock
Fits Browning BAR .30-06 20 round magazines.
- Easiest and quickest way to make a 10 round Browning BAR Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
$9.95 As low as: $7.95 -
Browning BAR 5/20 Magblock for (Hunting)
Fits Browning BAR .30-06 20 round magazines.
- Easiest and quickest way to make a 5 round Browning BAR Magazine perfect for hunting.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
$9.95 As low as: $7.95 -
H&K G36 10/30 Magblock (5.56x45)
Heckler & Koch G36 Magblock
- Works with Factory Magazines for the HK G36 only.
- 10/30 and 15/30 configuration (10 rounds in a 30 round body)
- Simple quick install.
$6.50 As low as: $5.95 -
Smith & Wesson 5900 Series Magblock 10/14 (9mm)
Smith & Wesson 5900 Series Magblock 10/14 (9mm)
This Magblock fits the Smith & Wesson 5900 Series 14 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds under the magazine follower. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10/15 S&W 5900 Series magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.
-Block is designed for the 14 round, black follower, early version, 659 series magazines.
$6.59 As low as: $5.95 -
Eagle Imports SPS 10/21 Magblock (9mm/38Super)
Magblock 10 Round Limiter for Eagle Import SPS 21 Round 9mm/.38 Magazines
- Fits 21 round 9mm/38super Factory Eagle Import SPS magazines.
- Easy installation into the follower.
- Limits the magazine to 10 rounds of 9mm/38super.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.$6.95 As low as: $5.95