Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Magblocks

Magazine Capacity Limiters also known as Magblocks for multiple rifles and pistol magazines.

Set Ascending Direction

Grid List

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Hudson H9_10_17 Magblock (U-20) For factory 17 round magazine

    Hudson H9 Magblock 10/17 (9mm)

    Hudson H9 9mm Magblock 10 and 15 Round Limiters

    - Fits 17 round 9mm Factory  Hudson H9 9mm magazines.
    - Easy installation at the base of the magazine. 
    - Limits the magazine to 10 rounds of 9mm
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.

    Note: This limiter can also be made using our Universal Pistol Limiter and cutting flush at the base with #20 showing in the indicaor notch. 
    The limiters shown here come pre-cut and glued for a drop in conversion. 

  2. US Palm AK-47 10/30 Magblock

    US PALM AK47 10/30 Magblock (7.62x39)

    Magblock for US Palm AK47 (7.62x39mm) Magazines.

    - This block fits the US Palm 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.

    Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK

  3. Thompson .45 10 Round Limiter for 20 Round magazine

    Thompson .45 10/20 Round Limiter Magblock

    This block fits 20 Round Thompson .45 magazines to limit them to 10 rounds.

    The spring can also be epoxied to the block for a permanent installation. A spring catch at the bottom makes installation quick and easy.

  4. Tanfoglio Stock Master 10_17 (U-18) Universal Limiter cut to #18

    Tanfoglio Stock Master Magblock 10/17 (9mm)

    Tanfoglio Stock Master Magblock 10/17 Round and 15/17 Round Limiter for 17 Round Magazines

    This Magblock fits the Tanfoglio Stock Master 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
    -Simple install to make 10 round Tanfoglio Stock Master and  Italia Defiant Stock Magazines.
    -No modification to the magazine is required.
    -Lightweight and will not interfere with magazine reliability.

    "Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "18" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

    *This block is designed for the Tanfoglio Stock Master Factory magazine (ONLY), and will not work on Mec-Gar magazines. 

  5. ProMag Ruger Mini-30_10_30(UAK-33.5) Block installs at the base.

    PROMAG Mini 30 Ruger Magblock 10/30 (Polymer)

    PROMAG Ruger Mini 30 Magblock 10/30 Magazine Capacity Limiter

     This block is for use in PROMAG RUGER 30 round Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 20 round magazine to hold only 10 rounds.

    - Only for use in PROMAG manufactured magazines. 

    - Designed to work in the polymer magazine only.

  6. Promag M14_M1A_10_20 Converted Pmag will only work in Promag m14-m1a magazine

    PROMAG M14 -M1A Blocks 10/20

    ProMag M14/M1A 7.62x51mm/.308 20 round magazines.

    - Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.

    - Can be permanently attached to the spring with epoxy.

    - The block attaches to the spring to prevent noise and movement.

    - No magazine modifications required.

    -Allows loading on a closed bolt with 10 rounds installed.

    -New light weight design.

    -This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.

  7. Walther PDP Compact 9mm 10/15 Block installs at the base.

    Walther PDP, PDP-F Compact Magblock 10/15 (9mm)

    Walther PDP Compact Magblock 10 Round Limiters

    - Fits 15 round 9mm Factory Walther PDP Compact magazines as shown.
    - Tested in Walther PDP Compact Magazines.
    - Easy installation at the base of the spring as shown.
    - Limits the magazine to 10 rounds of 9mm
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.

    Universal Limiter Instructions:  To make this limiter out of the Universal  just cut flush at the base with number 15 shown in the indicator notch. Cement together after testing fit.

    -This block will fit the new PDP-F magazines. 

  8. Beretta 90-Two 10_17 Magblock Universal Block cut to #18

    Beretta 90-Two, 92X, 92G, 92A1 Magblock 10/17 (9mm)

    Beretta 90-Two Magblock 10/17 (9mm) 10 Round Limiter

    This Magblock fits the factory Beretta 90-Two 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

    - Simple install to make 10/17 Beretta 90-Two magazines.
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Beretta 90-two magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

    -Will not work on older Beretta 92 17 round magazines. Will only work on Beretta magazines pictured below.

    *Please click on photos for installation instructions. 

    *Universal Limiter Instructions: Cut to #18 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #18 will show in the limiter window notch like in the photos. 

     Attention: Make sure to verify what magazine you have before ordering. The magazine you have should look like the one in the picture. 

  9. Taurus G3_10_17(U-15) Block is designed for the G3 17 round magazine.

    Taurus G3, G3X Magblock 10/17 (9mm)

    Taurus G3 Magblock 10/17 and 15/17 (9mm) 10 and 15 Round Limiter

    This Magblock fits the factory Taurus G3 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus G3 magazines to 10 rounds. No external modification to the magazine is required

    Has been tested on original factory magazines.

     

  10. S&W M&P Shield Plus 10_13 Magblock for Shield Plus 13 round magazines.

    S&W M&P SHIELD PLUS, EQUALIZER 10/13 Magblock (9mm)

    Smith & Wesson M&P Shield Plus, Equalizer 9mm Sub-Compact Magblock 10 Round Limiter

    - Fits 13 round 9mm M&P Shield Plus magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9 mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

     

  11. PMAG LR10 .308 5 Round Limiter

    Pmag LR 10 Magblock 5/10 (.308) Gen M3 (5 Round)

    Pmag LR10 Magblock GEN M3 Magazine Capacity Limiters (5 Round for Hunting)

    Fits the Magpul LR10 .308/7.62x51mm 10 round Pmags and will convert them to hold only 5 rounds for hunting. 

    - Will NOT fit older version magazines. Gen M3 Only.

    - Load magazines on a closed bolt in most rifles.

    - Easy to install. New style block allows you to use the stock locking plate.

    - No external magazine modifications.

  12. GSG-15 Magblock .22LR 10/22 (.22LR)

    GSG-15 Magblock .22LR 10/22 (.22LR)

    GSG-15 .22LR 10/22 Magblock 10 and 15 Round Limiter

    - This block will convert 22 round GSG-15 .22LR magazines into a 10 round magazine.

    - Easy to install without damage to your magazines.

    -Installs at the base of the magazne.

  13. GSG AK-47 .22_10_24 Magblock - Block is designed to work in the AK-22 AK-47 GSG magazines.

    GSG AK-47.22LR 10/24 Magblock (.22LR)

    GSG AK-47 .22LR 10/24 Magblock 10 and 15 Round Limiter

    - This block will convert 22 round GSG .22LR magazines into a 10 round magazine.

    - Easy to install without damage to your magazines.

    -Installs at the base of the magazne.

  14. Walther PPQ M2 (.40) 10_13 (U-12) Block installs at the base.

    Walther PPQ M2 Magblock 10/13 (.40)

    Walther .40 PPQ M2 Magblock 10 Round Limiters

    - Fits 13 round .40 Factory Walther PPQ M2 magazines as shown.
    - Tested in M2 version PPQ Magazines.
    - Easy installation at the base of the spring as shown.
    - Limits the magazine to 10 rounds of .40
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.

    Universal Limiter Instructions:  To make this limiter out of the Universal just cut flush at the base with number #12 shown in the indicator notch. Cement together after testing fit. 

  15. Panzer Arms MKA1919_AR12_5_10 (12ga) Block installs at the base and replaces the factory locking plate

    Panzer Arms MKA1919 AR-12 Magblock 5/10 (12ga)

    Magblock for Panzer Arms MKA1919 AR-12 5 Round Limiter for 10 Round Magazines (12ga)

    • Fits Panzer Arms 10 round magazines and will limit them to 5 rounds. 
    • Fits at the base of the magazine. This block will replace the factory locking plate.
    $6.95
Set Ascending Direction

Grid List

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5