Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Magblocks

Magazine Capacity Limiters also known as Magblocks for multiple rifles and pistol magazines.

Set Ascending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Magblock 10 Round Limiter for 20 Round Sig Sauer P226 Magazines. Please see the photos to be sure your magazines are the same.

    Sig Sauer P226 Magblock 10/20 (9mm)

    Magblock 10 Round Limiter for Sig P226 20 Round Magazines

    - Fits 20 round 9mm Sig P226 US made magazines as pictured
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  2. STI 140mm 9mm 10/20 Magblock 10 Round Limiter

    STI Magblock 10/20 (9mm) for 140mm Magazine

    Magblock 10 Round Limiter for STI 140mm 20 Round 9mm Magazines

    - Fits 20 round 9mm Factory STI 140 mm magazines. 
    - Easy installation at the base of the spring.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 
    - Made of a super strong, heat resistant, fiber reinforced polymer.

  3. 10 Round Limiter for Promag and Bulgarian AK47 Magazines

    AK47 10/30 Block for Promag and Bulgarian Magazines

    Magblock for Promag and some Bulgarian AK47 (7.62x39mm) Magazines.

    - This block fits the Promag and Bulgarian (Plastic follower only) 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.

    - Replaces the lower locking plate for an easy and secure install.

    - Note: This is a modified Tapco limiter so will be marked with Tapco markings. The cut down lines for other sizes are not accurate. Only for use with 30 round magazines.

  4. 5.45 x 39 mm 10 Round Limiter. Fits 30 round magazines and installs as shown.

    5.45x39 AR15 Magblock 10/30 Limiter

    Magblock 10/30 limiter for 5.45x39 mm AR Magazines only.

    - Tested in C-Products and ACS magazines.
    - These blocks will convert a 30 round 5.45x39 mm magazine to hold only 10 rounds.

  5. Machinable Yellow Pouch Double Bubble Epoxy

    Epoxy Machinable- Fast Set

    Epoxy, Machinable Fast Setting.


    Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used.
    Features a longer working time than the Red fast set epoxy:
    - Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
    - Handling strength: 4 hours.
    - Color: Aluminum.
    - Viscosity: Honey.
    - Full Strength: 24 hours

    3.5 Grams.
    $2.39
  6. Fast Set Epoxy

    Epoxy Fast Setting

    Epoxy Fast Setting


    Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
    Features:
    - Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
    - Handling strength: 15-30 minutes.
    - Color: white.
    - Viscosity: honey.
    - Full Strength: 24 hours

    4.0 Grams.
    $2.39
  7. Thompson .45 Magblock 10 Round Limiter.

    Thompson .45 Magblock 10 round Limiter

    This block fits 30 Round Thompson .45 magazines to limit them to 10 rounds.

    The spring can also be epoxied to the block for a permanent installation. A spring catch at the bottom makes installation quick and easy.

  8. UZI and Metalform Limiter to make a 30 round magazine out of a 32 round magazine. Requested for use in Ohio.

    UZI and Metalform 30/32 Magblock

    This block will work with 32 round 9 mm UZI and MetalForm magazines to make a 30 round magazine. It replaces the lower floor plate. The spring can also be epoxied to the block which allows for disassembly and cleaning, or epoxy the floor plate closed for a more secure modification.
  9. CZ75 10 Round Limiter by Magblock

    CZ-75 Magblock 10/14 Limiter (.40)

    Magblock 10 Round Limiter for CZ-75 (.40) 14 Round Magazines

    - Fits 14 round .40 CZ-75 SP-01 magazines using extended floor plate.
    - Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .40 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design.
    - Made of a super strong, heat resistant, fiber reinforced polymer.
    - Tested on CZ-75 magazines made by Mec-Gar as shown in the photos. Has also been reported to work with factory magazines. The block may need to be modified to work with magazines from other manufactures.

  10. Magblock 10 Round Limiter for CZ75 SP01 .40 12 Round Magazines.

    CZ-75 Magblock 10/12 Limiter (.40)

    Magblock 10 Round Limiter for CZ-75 (.40) 12 Round Magazines

    - Fits 12 round .40 CZ-75 SP-01 magazines
    - Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .40 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design.
    - Made of a super strong, heat resistant, fiber reinforced polymer.
    - Tested on CZ-75 magazines made by Mec-Gar as shown in the photos. Has also been reported to work with factory magazines. The block may need to be modified to work with magazines from other manufactures.

  11. Magblock 10 Round Limiter for H&K SA80 Magazines.

    H&K Magblock 10/30 Limiter (SA80 and HK416)

    H&K Magblock 10/30 Limiter

    - For use in H&K SA80 and HK416 type 30 round magazines as pictured.

    - These blocks will convert a 30 round magazine to hold only 10 rounds.

    - The locking plate is not used with the limiter installed.

  12. Magblock 10 Round limiter for the new Magpul Pmag AK47 magazine.

    *NEW* PMAG AK47 10 and 15 Round Limiters

    Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

    - This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.

    - Choose the option below if you need a 15 round limiter.

    - Replaces the lower locking plate for an easy and secure install.

    - Built in spring catch holds the limiter securely in place and prevents noise.

    - Made of super strong heat resistant polymer.

  13. 10 Round Limiter for VZ58 Magazines

    VZ58 Magblock 10/30 Limiter

    Magblock for VZ 58 (7.62x39mm) Magazines.

    - This block fits the VZ.58 30 round magazines in 7.62x39mm and will convert them to a 10 round magazine.

    - Replaces the lower locking plate for an easy and secure install.

    - These are marked as an "AK47" limiter but is modified to work in the VZ.58. I know these rifles don't usually share any parts :)

    -NOTE: Only fits the type of VZ.58 magazine shown in the photos. These will not work if your magazine internals are significantly different than those pictured.

  14. TEC-9 Magblock 10 Round Limiter. Easily installs as shown here. Please see the other photos to be sure your magazines are the same type.

    TEC-9 10/32 Magblock 9mm

    10 Round Limiter for 32 Round TEC-9 Magazines

    Magblock 10/32 Magazine Capacity Limiter for the TEC-9 32 round 9mm magazines pictured here.

    - This block sits on top of the locking plate to convert a 32 round magazine to hold only 10 rounds.

    - Very easy to install

    - Does not affect reliability.

    - No increase in spring pressure.

    - Block is marked "STEN" with "2X" at the end.

  15. Magblock 10 Round Limiter for the Walther P99 15 round 9mm magazines.

    Walther PPQ 9mm Magblock 10/15 (10 Round Limiter)

    Walther PPQ and P99 Magblock 10 Round Limiters

    - Fits 15 round 9mm Factory Walther PPQ and P99 magazines as shown.
    - Will also work in M2 version PPQ Magazines.
    - Easy installation under the follower as shown.
    - Limits the magazine to 10 rounds of 9mm
    - Held in place with spring tension or can be epoxied for a permanent modification.
    - Lightweight, efficient design.

Set Ascending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5