Magazine Accessories
-
Mag Magnet Device
Mag Magnet for AR15
ALL NEW and Improved Generation 2 model, using the N52 Neodymium Magnet for strongest hold with 1.3 lb more strength than the original.
Mag Magnet is a patented product that is magnetized and used with the standard bullet button for California legal AR-15's. Mag Magnet is a true original, don't fall for cheap imitations.
For use with the standard AR-15 platform (.223/5.56mm).
Mag Magnet is not compatible with the Prince 50 or the Raddlock. It only works with the standard Bullet Button™.Magblock LLC only recommends use of this device out of state or with .22 rimfire conversion kits only.
Leaving Mag-Magnet on a firearm may designate it as an illegal assault weapon in violation of California law. Do not use Mag-Magnet in California on magazines with capacities greater than 10 rounds. It is advised that Mag-Magnet users become familiar with California DOJ requirements and updated interpretations of existing laws and regulations.
Magblock LLC shall not be held responsible in any way for the inappropriate use of the product by the user. User assumes all liabilities and risks associated with ownership and use of this product.
$24.95 As low as: $20.95 -
Pmag Ranger Plate .223 Foliage
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Magpul Ranger Plate 223
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG.
The ranger plate incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Made in U.S.A.
$5.95 -
Magpul Enhanced Self-leveling Follower USGI .223 - Yellow
The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the current issue aluminum USGI 30-round magazine follower.
Featuring a patent pending 4-way anti-tilt design, the Enhanced Self-Leveling Follower is made from a non-hydroscopic and self-lubricating polymer.
Made in U.S.A.
$2.39 -
Magpul Enhanced Self-leveling Follower USGI .223 - FOL GRN
The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the current issue aluminum USGI 30-round magazine follower.
Featuring a patent pending 4-way anti-tilt design, the Enhanced Self-Leveling Follower is made from a non-hydroscopic and self-lubricating polymer.
Made in U.S.A.
$2.39 -
Pmag Ranger Plate .223 Black- Gen M3
For use with Magpul Pmag Gen M3Gen M3 Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG Gen M3 that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Fits Gen M3 Pmags only in 10, 20, and 30 round sizes.
$7.95 -
Patch MagazineBlocks.com Round
Great for the range bag and to show your magazines are blocked.
Also for patch collectors like myself :)
- 3” Round PVC
- Hook and loop backing
$4.95 -
Magblock Locking Plate for Magpul Pmag
MagazineBlocks LLC locking plate for Magpul PMAG .223/ 5.56 magazines. Fits 10, 20, and 30 round Pmags. This is our brand locking plate since we are sold out of originals. Works the same. Choose Generation of your magazines below: Gen M3 will state this on the side. If you don’t see it then you have Gen 2 / /MOE pmags.$4.00 -
Magblock Upgrade 30 Round AK-47 Replacement Spring for Polymer Magazines
- Replacement upgrade stainless steel springs.
- Uses highest quality 17-7 Stainless Steel to prevent tension loss.
- Fits all Polymer AK-47 magazines including Pmag, Tapco, Promag, Circle10, Bakelite, Arsenal, etc.
- Exceeds military specs
- Guaranteed not to lose tension!
- Great to use with Magblock Limiters also.
- Order our 24 coil for use in mil spec metal AK mags.
Replacement upgrade 30 round spring for use in AK magazines including Pmags, Tapco, Promag, Circle10, Bakelite, Arsenal. Use along with our 10 round blocks for an upgrade or save your original springs. Uses the highest quality 17-7 Stainless spring steel which has the best properties for magazine spring use. Most companies don't use this quality steel due to the added cost, but if you want the best it will cost a little more. These 30rd AK47 magazine spring holds up in the harshest condition and won't loose tension over time even if maintained fully loaded. We guarantee spring will not be damaged from long term storage of fully loaded magazines!
These springs use 17-7 PH is a precipitation-hardened stainless steel that is well suited for aerospace and other applications requiring high strength and good corrosion resistance and formability. Type 17-7PH is a Chromium-Nickel-Aluminum, austenitic stainless steel. It is the most formable of all PH grades and has the highest strength and hardness. It is less magnetic than other PH grades and offers minimal distortion upon heat treatment. This material maintains its valuable properties at temperatures up to 800 F.
$6.99 -
Pmag Ranger Plate .223 OD
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$5.95 -
Pmag Ranger Plate .223 FDE
The Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
$7.95 -
Magblock AR Upgrade 20 Round Replacement Spring
Replacement 20 round Stainless Steel spring for use in Pmag and USGI magazines$6.59 -
Magblock AR Upgrade 30 Round Replacement Spring
- Replacement upgrade stainless steel springs.
- Uses highest quality 17-7 Stainless Steel to prevent tension loss.
- Fits all AR magazines including Pmag, standard GI issue, Hexmags, etc.
- Exceeds USGI specs
- Guaranteed not to lose tension!
- Great to use with Magblock Limiters also.
Replacement upgrade 30 round spring for use in AR magazines including Pmags, Hexmags and standard USGI magazines. Use along with our 10 round blocks for an upgrade or save your original springs. Uses the highest quality 17-7 Stainless spring steel which has the best properties for magazine spring use. Most companies don't use this quality steel due to the added cost, but if you want the best it will cost a little more. These 30rd AR15 magazine spring holds up in the harshest condition and won't loose tension over time even if maintained fully loaded. We guarantee spring will not be damaged from long term storage of fully loaded magazines!
- These springs use 17-7 PH is a precipitation-hardened stainless steel that is well suited for aerospace and other applications requiring high strength and good corrosion resistance and formability. Type 17-7PH is a Chromium-Nickel-Aluminum, austenitic stainless steel. It is the most formable of all PH grades and has the highest strength and hardness. It is less magnetic than other PH grades and offers minimal distortion upon heat treatment. This material maintains its valuable properties at temperatures up to 800 F.
$6.59 -
MAGPUL Original Mag Assist .223 OD
When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes.
- Durable synthetic rubber loop with recessed rough gripping surface.
- Quick and easy installation and removal.
- Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide.
$3.59 -
MAGPUL Original Mag Assist .223 FDE
When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes.
- Durable synthetic rubber loop with recessed rough gripping surface.
- Quick and easy installation and removal.
- Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide.
$3.59