Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Epoxy

Epoxy and glues for use to permanently modify magazines to hold a desired capacity.
Set Descending Direction

Grid List

per page
  1. Sale
    Flush cut pliers 6". Great for cutting Glock, XD, XDM, Universal and Pmag Magblocks.

    Large 6" Flush Cutters

    Flush cut pliers make easy work of cutting through the Glock, XD/XDM, Universal and Pmag limiters. Can cut universal limiters flush with the base.

     

    Good for detail work.

    Regular Price: $13.95

    Special Price $10.95

  2. Fast Set Epoxy

    Epoxy Fast Setting

    Epoxy Fast Setting


    Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
    Features:
    - Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
    - Handling strength: 15-30 minutes.
    - Color: white.
    - Viscosity: honey.
    - Full Strength: 24 hours

    4.0 Grams.
  3. Bersa Thunder 40 10/13 Using a Universal Pistol Limiter cut to #8

    Bersa Thunder 40 Magblock 10/13 (.40)

    Bersa Thunder Magblock 10/13 (.40) 10 Round Limiter

    This Magblock fits the factory Bersa Thunder .40 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired. This provides an easy method to convert your factory Bersa Thunder .40 magazines to 10 rounds. No external modification to the magazine is required. 

    - Simple install to make 10/13 Bersa Thunder High Capacity magazines. 
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Bersa Thunder magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 
    *Please click on photos for installation instructions. 

    If using the Universal Limiter: Cut the universal limiter to between number "8" showing in the indicator notch. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

  4. Bersa Thunder 10/17 uses a Universal Pistol Limiter cut to #16

    Bersa Thunder 10/17 Magblock (9mm)

    Bersa Thunder Magblock 10/17 (9mm) 10 Round Limiter

    This Magblock fits the factory Bersa Thunder 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired. This provides an easy method to convert your factory Bersa Thunder 9mm magazines to 10 rounds. No external modification to the magazine is required. 

    - Simple install to make 10/17 Bersa Thunder High Capacity magazines. 
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Bersa Thunder magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 
    *Please click on photos for installation instructions. 

    If using the Universal Limiter: Cut the universal limiter to between number "16" showing in the indicator notch. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

  5. Bersa Thunder Compact 9mm 10_13  Universal block Cut #6

    Bersa Thunder Compact Magblock 10/13 (9mm)

    Bersa Thunder Ultra Compact Magblock 10/13 (9mm) 10 Round Limiter

    This Magblock fits the factory Bersa Thunder Ultra Compact 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired. This provides an easy method to convert your factory Bersa Thunder Ultra Compact 9mm magazines to 10 rounds. No external modification to the magazine is required. 

    - Simple install to make 10/13 Bersa Thunder Plus Ultra Compact magazines. 
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Bersa Thunder magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 
    *Please click on photos for installation instructions. 

    If using the Universal Limiter: Cut the universal limiter to between number "6" showing in the indicator notch. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

  6. Bersa Thunder Plus .380 10/15. This block is made from our Universal Pistol limiter cut to #9 with the base sanded on the sides.

    Bersa Thunder Magblock 10/15 (.380)

    Bersa Thunder Plus Magblock 10/15 (.380) 10 Round Limiter

    This Magblock fits the factory Bersa Thunder 15 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired. This provides an easy method to convert your factory Bersa Thunder .380 magazines to 10 rounds. No external modification to the magazine is required. 

    - Simple install to make 10/15 Bersa Thunder Plus magazines. 
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original factory Bersa Thunder magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 
    *Please click on photos for installation instructions. 

    If using the Universal Limiter: Cut the universal limiter to between number "9" showing in the indicator notch. Also, sides and front of base sanded down. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

  7. Sale
    Flush cut pliers 6". Great for cutting Glock, XD, XDM, Universal and Pmag Magblocks.

    Large 6" Flush Cutters

    Larger 6" Flush cut pliers make easy work of cutting through the Universal Limiters, Glock, XD/XDM, and Pmag limiters. Can cut universal limiters flush with the base, but may take a cut on each side to get through. 

    Regular Price: $13.95

    Special Price $10.95

  8. Magblock epoxy cement

    Magblock Epoxy Cement

    Magblock Cement


    Magblock Cement (15 ml bottle with applicator tip). Will work for a few rifle or up to 15+ pistol limiters depending on amount used.
    Features:
    - Starts to set in only 1-3 minutes. Can be built up.
    - Handling strength: 5 minutes.
    - Color: Black.
    - Viscosity: paste.
    - Full Strength: 12 hours

    15 ml bottle
    $3.95
  9.  A cyanoacrylate glue such as "super glue" is best for sealing the floor plate of Pmags closed. Pmags are made of Zytel polymer which is difficult to adhere to. Super glue on the base of the floorplate works well for a permanent modification.

    HFT Super Glue

    HFT Super Glue

    A cyanoacrylate glue such as "super glue" is best for sealing the floor plate of Pmags closed. Pmags are made of Zytel polymer which is difficult to adhere to. Super glue on the base of the floorplate works well for a permanent modification.

    3 grams

    $1.95
  10. Machinable Yellow Pouch Double Bubble Epoxy

    Epoxy Machinable- Fast Set

    Epoxy, Machinable Fast Setting.


    Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used.
    Features a longer working time than the Red fast set epoxy:
    - Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
    - Handling strength: 4 hours.
    - Color: Aluminum.
    - Viscosity: Honey.
    - Full Strength: 24 hours

    3.5 Grams.
  11. ProMag Bersa Thunder 10_17(U-19) Universal Pistol Limiter block cut to #19

    ProMag Bersa Thunder Magblock 10/17 (9mm)

    Promag Bersa Thunder Magblock 10/17 (9mm) 10 Round Limiter

    This Magblock fits the Promag Bersa Thunder 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired. This provides an easy method to convert your factory Bersa Thunder 9mm magazines to 10 rounds. No external modification to the magazine is required. 

    - Simple install to make 10/17 Promag Bersa Thunder High Capacity magazines. 
    - No modification to the magazine is required.
    - Lightweight and will not interfere with magazine reliability.
    - Works on original Promag Bersa Thunder magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 
    *Please click on photos for installation instructions. 

    If using the Universal Limiter: Cut the universal limiter to between number "19" showing in the indicator notch. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

Set Descending Direction

Grid List

per page