Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

Products

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Sale
    Gen M3 Magblock 10/30

    GEN M3 Pmag MCL 10/30 Block 10 Round Limiter

    10 Round Limiter for Gen M3 30 Round Pmags

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags. Can NOT be snapped down to fit 20 round Gen M3 Pmags. Please order pre-trimmed blocks for your 20 round Gen M3 Magazines.

    Regular Price: $5.95

    Special Price $4.95

    As low as: $3.95
  2. Lancer 10/30 Magblock

    Lancer L5 10/30 Magblock

    Lancer L5 10/30 MCL (Magazine Capacity Limiter) for 30 round Lancer L5 Advanced WarFighter magazines in .223/5.56mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - Only fits L5 Advanced Warfighter with slide on base. Will not fit older L5 magazines.

    - Does not affect reliability.

    - No increase in spring pressure or wear. 

    (Note: This is a custom modified Pmag block)

  3. Lancer 10/20 Magblock

    Lancer L5 10/20 Magblock

    Lancer L5 10/20 MCL (Magazine Capacity Limiter) for 20 round Advanced Warfighter L5 magazines in .223/5.56mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

    - Only fits L5 Advanced Warfighter with slide on base. Will not fit older L5 magazines.

    - Does not affect reliability.

    - No increase in spring pressure or wear. 

    (Note: This is a custom modified Pmag block)

  4. Sale
    PMAG MCL 10/20 Block

    GEN M3 PMAG 10/20 Magblock 10 Round Limiter

    Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Gen M3 Pmags in .223/5.56mm.

    - Fits NEW Gen M3 Pmag 20  (Curved body)

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed in most rifles. Some trimming of the limiter may be required for this.

    - Does not affect reliability.

    - No increase in spring pressure. 

    Regular Price: $5.95

    Special Price $4.95

    As low as: $3.95
  5. Mini 14 10/20 Magazine Block for Promag Only

    Mini 14 Magblock 10 and 15 Round Limiters (Ruger)

    Mini 14 Magblock 10/20 MCL (Magazine Capacity Limiter for Ruger Magazines

     This block is for use in RUGER 20 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 20 round magazine to hold only 10 or 15 rounds. (Select option below). 

    - Only for use in RUGER manufactured magazines. 

    - This is a modified USGI magblock.

  6. HK416 22LR 10 round limiter. Works with the pictured magazines.

    HK416 22LR 10/30 Magblock

    HK416 22LR 10/30 Magblock 10 Round Limiter

    - This block will convert 30 round HK 416 22LR magazines into a 10 round magazine.

    - Easy to install without damage to your magazines.

  7. MPA 10 Round Limiter

    Masterpiece Arms MPA 10/32 Magblock 9mm (Tapco)

    10 Round Limiter for 32 Round Tapco MPA Magazines

    Magblock 10/32 Magazine Capacity Limiter for the Masterpiece Arms 32 round 9mm magazines made by Tapco.

    - This block will replace the lower spring attachment point or locking plate and convert a 32 round magazine to hold only 10 rounds.

    - Very easy to install

    - Does not affect reliability.

    - No increase in spring pressure.

    - Slight modification of the follower is required to fit all 10 rounds. Please see the pictures posted here for instructions.

  8. SCAR 16 10/30 limiter

    SCAR 16 Magblock 10/30 Limiter

    SCAR 16 Magblock 10/30

    - For use in the SCAR 16 FNH 30 round magazines

    - These blocks will convert a 30 round SCAR 16 magazine to hold only 10 rounds.

    - No modification to your original SCAR magazines is required to use these limiters.

    - NOTE: For use only in FNH manufactured SCAR 16 factory magazines. For regular metal AR magazines you must use the USGI limiters.

  9. Pmag Ranger Plate .223 Gen M3

    Pmag Ranger Plate .223 Black- Gen M3

    For use with Magpul Pmag Gen M3

    Gen M3 Magpul PMAG Ranger Plate

    This is a floorplate replacement for the 5.56x45 PMAG Gen M3 that incorporates an integral loop similar to the original Magpul USGI Ranger.

    When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.

    Fits Gen M3 Pmags only in 10, 20, and 30 round sizes.

    $5.95
  10. Promag 10/30 Magblock for Polymer magazines.

    Steyr AUG 10/30 Magblock 10 Round Limiter

    10 Round Limiter for Steyr AUG 30 Round Polymer Magazines

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Steyr AUG 30 round polymer magazines in .223/5.56mm.

    - This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - Customized base of the Magblock includes two locking points just like the original locking plate.

    - Does not affect reliability.

    - No increase in spring pressure.

  11. 10 Round Limiter for ArmaLite 20 Round Magazine

    AR-10 ArmaLite Magblock (10 or 15 Round Limiter)

    Magblock for ArmaLite AR10 20 Round Magazines.  10 and 15 Round Limiters.

    Fits ArmaLite AR10  .308/7.62x51mm 20 round magazines and will convert them to hold either 10 or 15 rounds.

    - Easy to install in seconds.
    - No need to drill any holes.
    - Load magazines on a closed bolt in most rifles.
    - No external magazine modifications required.

  12. Magblock 10 Round Limiter for the CAA 30 Round MAG-17 Magazine.

    CAA 15/30 Magblock 15 Round Limiter

    15 Round Limiter for CAA Indicative 30 Round Polymer Magazines

    Magblock 15/30 MCL (Magazine Capacity Limiter) for CAA 30 round polymer magazines in .223/5.56mm. 

    - This block will attach to the bottom of the spring, and sits on top of the original locking plate.
    - Easy conversion of 30 round CAA magazines to hold 15 rounds.
    - Does not affect reliability.
    - No increase in spring pressure. 


  13. The Magblock 10 round limiter for the new Gen M3 LR20 Pmag is ease to install.

    Pmag LR 20 Magblock (.308) Gen M3 (5,10 & 15 Round Limiters)

    Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)

    Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install. Video instructions available under the FAQ Video link. Attaches to the original locking plate with an included screw. No need to drill any holes. Only a screw driver is needed to install

    - Will NOT fit older version magazines. Gen M3 Only.

    - Dust covers still fit with 10 rounds loaded.

    - Load magazines on a closed bolt in most rifles.

    - Easy to install.

    - Includes required screw.

    - No external magazine modifications.

  14. XD 9mm 15 round limiter for the 16 round magazines.

    Springfield XD 9mm 15 Round Magblock

    Springfield XD 9mm 15 Round Magblock

    • Fits 16 round XD and XD Mod 2 9mm magazines. 
    • Easy installation under the magazine follower.
    • Limits the magazine to 15 rounds of 9mm.
    • Can be epoxied for a permanent modification. 
    • Lightweight, efficient design. 
  15. Magblock 10 Round Limiter for ProMag DPMS LR-308. Easy to install. The spring fits into the hole in the block to prevent movement and noise.

    ProMag DPMS LR-308 Magblock 10 and 15 Round Limiters

    Magblock for ProMag DPMS LR-308 20 Round Magazines.  10 or 15 Round Limiters available.
    Fits Promag DPMS LR-308 20 round magazines in .308/7.62x51mm and will convert them to hold only 10 or 15 rounds.

    - Easy to install in seconds.
    - No need to drill any holes.
    - Load magazines on a closed bolt in most rifles.
    - No external magazine modifications.

Set Descending Direction

Grid List

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5