Shopping Cart - $0.00

You have no items in your shopping cart.

 

Search results for 'pmag block'

Set Ascending Direction

Grid List

per page
Page:
  1. 1
  2. 2
  1. Promag M14_M1A_10_20 Converted Pmag will only work in Promag m14-m1a magazine

    PROMAG M14 -M1A Blocks 10/20

    ProMag M14/M1A 7.62x51mm/.308 20 round magazines.

    - Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.

    - Can be permanently attached to the spring with epoxy.

    - The block attaches to the spring to prevent noise and movement.

    - No magazine modifications required.

    -Allows loading on a closed bolt with 10 rounds installed.

    -New light weight design.

    -This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.

  2. Mission First Tactical 10/30 Custom cut Gen2 PMag block

    Mission First Tactical 10/30 Magblock

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Mission First Tactical 30 round Magazine in .223/5.56mm.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Will work on Standard Mission First Tactical and Extreme Duty mags. 

     -The stock locking plate is to be used with this Magblock. 

  3. XTech Tactical AK-47_10_30(UAK-38+Pmag) This block installs at the base and allows for use of the factory locking plate

    XTECH Tactical AK-47 10/30 Magblock (7.62)

    Magblock for X-Tech Tactical AK47 (7.62x39mm) Magazines.

    - This block fits the XTECH Tactical 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.

    - Replaces the lower locking plate for an easy and secure install.

    Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK

  4. HEXMAG 10_20_308-762x51 using a custom, cut Gen3 Pmag 10/20

    HEXMAG AR-10, SR25 5/20 Magblock (Hunting)

    Hexmag AR-10/SR25 Magblock 5/20

    - Magblock 5/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.

    - This block will convert a 7.62x51/.308 20 round magazine to hold only 5 rounds. 

    - Uses the original Hexmag locking plates.

  5. HEXMAG 10_20_308-762x51 using a custom, cut Gen3 Pmag 10/20

    HEXMAG AR-10, SR25 10/20 Magblock (.308/7.62X51) 10 & 15 Round Limiter

    Hexmag AR-10/SR25 Magblock 10/20

    - Magblock 10/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.

    - This block will convert a 7.62x51/.308 20 round magazine to hold only 10 rounds. 

    - Uses the original Hexmag locking plates.

  6. Sale
    Magblock Gen M3 15 Round Limiter for 20 Round Magazines.

    GEN M3 Pmag MCL 15/20 Block (15 Round Limiter)

    15 Round Limiter for Gen M3 20 Round Pmags

    Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Gen M3 (curved) Pmags in .223/5.56mm. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 15 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  7. Sale
    Gen M3 Magblock 15/30

    GEN M3 Pmag MCL 15/30 Block (15 Round Limiter)

    15 Round Limiter for Gen M3 30 Round Pmags

    Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed on many rifles.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  8. Sale
    Pmag Gen 2 MOE 10/30 Magblock

    Pmag Gen 2 MOE 10/30 Magblock

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Will also fit 30 round Emags. 

    - Compatable with original Pmags and "M" Series only.  These will not work without modifications in Gen 3 or M3 Pmags. We will have another product set up to buy pre-trimmed M3 blocks. Here are instructions on how to trim blocks to work with Gen M3 Pmags:   http://www.calguns.net/calgunforum/showpost.php?p=9787410&postcount=261

    Regular Price: $5.95

    Special Price $4.95

    As low as: $3.95
  9. Gen 2 Pmag 15/20 Magblock (Gen 2)

    Gen 2 Pmag 15/20 Magblock (Gen 2)

    Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 15 rounds.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    Note: This is a trimmed down 10 round block to allow 15 rounds.  These fit Straight Body Gen 2 Pmags only.  Gen 3 limiters are available as a different product. 

  10. Gen 2 Pmag 15/30 Magblock (GEN 2)

    Gen 2 Pmag 15/30 Magblock (GEN 2)

    Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Will also fit 30 round Emags.

    Note: This is a trimmed down 10 round block to allow 15 rounds.  These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.  

  11. Sale
    Gen M3 Magblock 10/30

    GEN M3 Pmag MCL 10/30 Magblock

    10 Round Limiter for Gen M3 30 Round Pmags

    Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags. Can NOT be snapped down to fit 20 round Gen M3 Pmags. Please order pre-trimmed blocks for your 20 round Gen M3 Magazines.

    Regular Price: $5.95

    Special Price $4.95

    As low as: $4.49
  12. Sale
    PMAG MCL 10/20 Block

    PMAG 20 MCL 10/20 Magblock (Straight Body Gen 2)

    Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm Gen M2 Only. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Fits Gen 2 Pmag 20 only (Straight body)

    Regular Price: $5.95

    Special Price $4.49

    As low as: $3.50
  13. Magpul Pmag Evo35_10_35 block

    Magpul PMag CZ Scorpion Evo Magblock 10/35 (9mm)

    Magblock 10 Round Limiter for Magpul PMag CZ Scorpion Evo (9mm) 35 Round Magazines

    - Fits 35 round 9mm Magpul PMag35 CZ Scorpion Evo magazines
    - Easy installation at the base of the spring on top of the original locking plate so you wont loose your original.
    - Limits the magazine to 10 rounds of 9mm. 
    - Lightweight, efficient design. 
    - Made of a strong, heat resistant, polymer.

  14. Magpul D60 10_60 Custom made block

    Magpul D60 10/60 Magblock (5.56)

    Magblock 10/60 MCL (Magazine Capacity Limiter) for Magpul 60 round D60 Drum in .223/5.56mm.

    - Magazines can be loaded with the bolt closed.
    - Does not affect reliability.
    - No increase in spring pressure.
    - Easy to install. See the video for instructions. 

     

    $14.95
  15. Glock PMag GL12 - 10_12 block

    PMAG 12 GL9 Glock Magblock 10/12 (9mm)

    Magblock 10 Round Limiter for Pmag 12 GL9 Magazines.

    - Fits 12 round Magpul Pmag GL9 magazines for Glock 26.

    - Easy installation at the base of the magazine and sits on top of the locking plate.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits Magpul Pmag 12 GL9 Magazines Only. Will not fit standard Glock type Magazines.


Set Ascending Direction

Grid List

per page
Page:
  1. 1
  2. 2