Shopping Cart - $0.00

You have no items in your shopping cart.

 

Search results for 'magazine coupler'

Set Ascending Direction

Grid List

per page
Page:
  1. 1
  2. 2
  1. Glock Replacement Spring G17

    Glock Magazine Spring for G19 and G23

    Glock Magazine Spring 9 Coil Replacements
    -Works with Magblock Limiters and Glock 9mm & .40 Followers sold here. 

    Compatable with the following magazines: 

    -Glock 19, 15 Round Magazines

    -Glock 23, 13 Round Magazines.

    $6.50
  2. Made in the USA

    Custom Magazine Blocks and Conversion Service

    We can design a custom magazine block for your needs. Please contact us for details by email. Any magazines shipped to us must be blocked before shipping to less than 10 rounds. We can ship you uncut limiters for this if needed.***NO EXCEPTIONS***  Turnaround time is anywhere from less than a week where a Universal limiter is used up to 4 weeks if a custom limiter is needed. If we are unable to make onethen your magazine will be returned and a full refund provided. 

    $16.95
  3. Glock Replacement Spring G17 (19 Round)

    Glock Magazine Spring for G17, 34, 35 and G22 (19 round magazines)

    Glock Magazine Spring 11 Coil Replacements

     

    Compatable with the following magazines: 

    - Fits 19 round G17, G18, G34, and G22 magazines

    -  Will fit Glocks 22, 31, 35, 37 newer mags. 

    - Can be cut down to fit 17 round G17 magazines. 

    $7.49
  4. Glock Replacement Spring G17

    Glock Magazine Spring for G17, 18, 20, 21, 22, 34, 35

    Glock Magazine Spring 10 Coil Replacements
    -Works with Magblock Limiters and Glock 9 mm Followers sold here. 

    Compatable with the following magazines: 

    - G17, G18 and G35 17 round magazines.
    - G20 15 round magazines 
    - G21 13 round Pre-Ban & older LE marked mags with follower 3955
    - G21 10 round magazines only.
    - G22, G35 Pre Ban and older LE marked mags.

    $7.49
  5. Mag-Rack mounted on the front of a safe w/ our magnet kits

    Mag-Rack Magazine Storage Rack

    Magblock Mag-Rack Magazine Storage Wall Rack For AR-15 PMags and Glock mags

     

    • Mag-Rack magazine storage racks will hold 6-AR15 Pmags or 12-Glock magazines
    • Are Mag-Rack magazine storage racks are made from 18-gauge steel and proudly made in the USA
    • Each rack comes powder coated for durability and will come with mounting hardware
    • Can be mounted to a wall or the side of a safe with the addtional add on options magnet kits
    $29.95
  6. Glock 9mm Magazine Insert New Style 1693

    Glock OEM Magazine Insert 9mm New Style

    Glock Factory Magazine Insert (9mm)

    Glock Magazine Insert 9mm New Style

    New Style 1693 floorplate only

     

     

    $4.99
  7. Glock extended magazine release.

    Glock Extended Magazine Release

    Glock Extended Magazine Release

    Aids In Fast, Positive Mag Changes

    Drop-in replacement for factory magazine catch has a deeply serrated button that protrudes farther from the frame to ensure positive, fast mag release on the first try. Gives a small but critical performance edge to the practical pistol competition shooter.

    Fits all 9mm, .40 S&W, .357 SIG, and .45 GAP Glocks as an extended release.

    Same length as the factory catch on the G20, 21, 29, and 30, so it can be used as a direct replacement for the original part.

    Here is one of the better YouTube videos that show how to install this part. It's an easy to install upgrade. 

     

    $5.95
  8. Glock 10_24 Magblock - this block is for the 24 round factory magazine only

    GLOCK MAGBLOCK FOR 24 ROUND MAGAZINE 10/24 (9mm)

    Glock 9mm Magblock for 24 Round (9mm) Magazines

    - Fits 24 round 9mm Foctory Glock 17 magazines 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type and magazine base extension shown in the pictures along with the newer black followers. If yours is different then modifications may be needed.

  9. Glock 10 round limiter for 33 round factory magazine

    Glock Magblock for 33 Round Magazine (9mm)

    Glock 9mm Magblock for 33 Round (9mm) Magazines

    - Fits 33 round 9mm Foctory Glock 33 round magazines and Korean manufacture magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of 9mm. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

  10. Glock .40 10 round limiter for 22 round magazines.

    Glock Magblock for 22 round (.40) Magazine

    Glock .40 Magblock for 22 Round (.40) Magazines

    - Fits 22 round .40 Glock and Korean manufacture magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 rounds of .40. 
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatible with the follower type shown in the pictures. If yours is different then modifications may be needed.

  11. Glock .45 Limiter for 27 round magazines. 10 round limiter pictured.

    Glock .45 Magblock for 27 Round Magazines

    Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines

    - Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 or 15 rounds of .45
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

    ** Select desired magazine capacity before adding to your cart.

  12. Universal limiter for AK type mgazines can be adjusted for different lengths and cut to the needed size.

    NEW Adjustable Universal AK47, AK74, AKS, SKS Magazine Limiter

    MAGBLOCK UNIVERSAL AK LIMITER KIT

    ALLOWS FOR AN EASY CUSTOM SOLUTION FOR MOST METAL AK TYPE MAGAZINES. REQUIRES CUTTING OF THE MAGBLOCK FOR A CUSTOM FIT. AS SHIPPED IT WILL LIMIT MOST 30 ROUND MAGAZINES TO SLIGHTLY LESS THAN 10 ROUNDS.

    * Optional Locking tab can be added for Pmag AK Magazines below. 

    Save time and money by making your magazines legal. 

    NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

    Fits most steel 30 round AK47, AK74, AKS, SKS, VZ, and Saiga magazines and will convert them to hold only 10 or 15  rounds. Replaces the flat locking plates at the bottom of the spring. This part must be removed. Tested with Romanian, Russian, Korean, Promag, Saiga, IO, Chinese magazines and more.

    - Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.
    - Pre notched cut outs in the most common lengths for easy cutting.
    - Works on many military spec steel AK47 magazines.

    Don't forget to check out our new upgrade stainless steel AK springs for polymer and steel magazines here or add below to your order. 

  13. Glock .45 Magblock 10 and 15 round limiters. Fit the Scherer 27 round Glock magazines shown in the photo.

    Glock .45 Magblock for 27 Round Scherer Magazines

    Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines

    - Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines.  *See details on correct follower types below. 
    - Easy installation under the magazine follower.
    - Limits the magazine to 10 or 15 rounds of .45
    - Held in place with spring tension or can be epoxied for a permanent modification. 
    - Lightweight, efficient design. 

    * Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
    Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

    ** Select desired capacity below. 

    Patent pending
  14. Magblock 2 Round Limiter for Mossberg 590M 10 Round Magazine

    Mossberg 590M 2 Round Limiter for 10 Round Magazines 12ga

    Magblock for Mossberg 590M 2 Round Limiter for 10 Round Magazines (12ga)

    • Fits Mossberg 10 round magazines and will limit them to 2 rounds in the magazine for hunting. 
    • Fits under the follower. The original plug will need to be removed by pulling out with pliers. See photos.
    • Can be held in with included screw or epoxy if a permanent modification is needed. 

     

    $16.95
  15. Mossberg 590M 2 Round Limiter for the 5 round magazine.

    Mossberg 590M 2 Round Limiter for 5 Round Magazines 12ga

    Magblock for Mossberg 590M 2 Round Limiter for 5 Round Magazines (12ga)

    • Fits Mossberg 5 round magazines and will limit them to 2 rounds in the magazine for hunting. 
    • Fits under the follower. The original plug will need to be removed by pulling out with pliers. See photos.
    • Can be held in with included screw or epoxy if a permanent modification is needed. 

     

    $15.95
Set Ascending Direction

Grid List

per page
Page:
  1. 1
  2. 2