MAGBLOCK UNIVERSAL AK LIMITER KIT

ALLOWS FOR AN EASY CUSTOM SOLUTION FOR MOST METAL AK TYPE MAGAZINES. REQUIRES CUTTING OF THE MAGBLOCK FOR A CUSTOM FIT. AS SHIPPED IT WILL LIMIT MOST 30 ROUND MAGAZINES TO SLIGHTLY LESS THAN 10 ROUNDS.

Fits most steel 30 round AK47, AK74, AKS, SKS, VZ, and Saiga magazines and will convert them to hold only 10 or 15  rounds. Replaces the flat locking plates at the bottom of the spring. This part must be removed. Tested with Romanian, Russian, Korean, Promag, Saiga, IO, Chinese magazines and more.

- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.
- Pre notched cut outs in the most common lengths for easy cutting.
- Works on many military spec steel AK47 magazines.

Don't forget to check out our new upgrade stainless steel AK springs for polymer and steel magazines here or add below to your order. 

• New Design
• Converts the updated ASC AR-15 7.62x39 30 round magazine to 10 rounds.
• Easy installation 
• Does not affect reliability 

Glock Factory Magazine Insert (9mm)

Glock Magazine Insert 9mm New Style

Fits Springfield M14/M1A 7.62x51mm/.308 15 round magazines.

- Easiest and quickest way to make a 10 round M14 Magazine.

- Can be permanently attached to the spring with epoxy.

- The block attaches to the spring to prevent noise and movement.

- No magazine modifications required.

-Allows loading on a closed bolt with 10 rounds installed.

10 Round Limiter for Mod2 20 Round Amend2 Magazines

Magblock 10/20 MCL (Magazine Capacity Limiter) for Amend2 20 round in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

- Does not affect reliability.

- No increase in spring pressure. 

 -A custom made adaptor allowes for use of the stock floor plate. 

10 Round Limiter for Mod2 30 Round Amend2 Magazines

Magblock 10/30 MCL (Magazine Capacity Limiter) for Amend2 30 round in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- Does not affect reliability.

- No increase in spring pressure. 

 -A custom made adaptor allowes for use of the stock floor plate. 

Magblock 10 Round Limiter for Sig MPX 9mm 35 Round Magazines

- Fits 35 round 9mm Sig MPX factory magazines.
- Easy installation by inserting the block at the base. This block replaces the factory locking plate.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 

Magblock 5 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 5 rounds for Hunting.

- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Patented design not available anywhere else. 

*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. Along with an adapter. 

Magblock 10/32 MCL (Magazine Capacity Limiter) for Daniel Defense 32 round magazines in .223/5.56mm.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.

- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 5 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else. 

*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size. 

Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount.  See our upgrade springs here: LINK

Ruger Five-Seven Magblock 10 Round Limiter

- Fits 20 round 5.7 mm Factory Ruger magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

-The 10-round limiter is marked Ruger 57-15 Round

Beretta M9-22, 92FS-22, M9A1-22 (.22LR) Magblock 10 Round Limiter New Improved Fit

- Fits 15 round .22 Beretta 92-22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Please click on photos for installation instructions. 

15 Round Limiter for Gen M3 30 Round Pmags

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed on many rifles.

- Does not affect reliability.

- No increase in spring pressure. 

- Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.

Universal AK47 10/30 Magblock

*** See our NEW Universal AK Limiter Here: CLICK HERE for the  IMPROVED UNIVERSAL AK KIT***

Fits most steel 30 round AK47 magazines and will convert them to hold only 10 rounds. Works best in magazines with flat locking plates like in the first photo. These tend to be Romanian, Russian, and Chinese magazines. Other plates may need to be modified to work correctly demonstrated in the second photo. This is encountered with some Bulgarian manufactured magazines. 

- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.

NOTE: These are made of additive manufacturing using high temperature ABS plastic. They're very durable and will last the life of the magazine. 

- If you are interested in identification of your AK magazines here is an excellent resource: AK47 Mag Identification