Search results for '10/22 round limiter'
-
Zev +5 Extension Glock 17, 34 Magblock 10/22 (10 Round Limiter)
Zev Technologies Plus 5 Glock 17 and Glock 34 (9mm) Magblock 10/22
- Fits 22 round 9mm Zev Technologies plus 5 basepad extension for Factory Glock 17 and Glock 34 magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures.Patent Pending
*This block is intended for the +5 Zev Technologies basepad extensions attached to a factory Glock 17 & Glock 34 magazine, and will limit a 22 round magazinedown to 10 rounds. *See pictures of Zev +5 Extension.
$6.95 As low as: $5.95 -
Springfield XDM Elite 10/22 Magblock (9mm)
Springfield XDM Elite 9mm Magblock
- Fits 22 round 9mm XDM magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.Springfield XDM Elite 9mm Magblock
$6.95 As low as: $5.95 -
Smith & Wesson M&P22 Magblock 10/12 (.22LR)
Smith & Wesson M&P22 (.22LR) Magblock 10 Round Limiter New Improved Fit
- Fits 12 round .22 M&P-22 magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Please click on photos for installation instructions.
$6.59 As low as: $5.95 -
GSG-15 Magblock .22LR 10/22 (.22LR)
GSG-15 .22LR 10/22 Magblock 10 and 15 Round Limiter
- This block will convert 22 round GSG-15 .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
-Installs at the base of the magazne.
$6.49 As low as: $5.95 -
Ruger 10/22 BX-15 Magblock (.22LR)
Ruger BX-15 Magblock 10 Round Limiters
- Fits 15 round 22LR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 10 rounds of 22LR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
Ruger 10/22 BX-25 Magblock (.22LR)
Ruger BX-25 Magblock 10 Round Limiters
- Fits 25 round 22LR Ruger BX25 magazines.
- Easy installation.
- Limits the magazine to 10 rounds of 22LR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
Tippman Arms M4-22 Magblock Limiter
Tippmann Arms M4-22 .22LR 10/22 Magblock 10 and 15 Round Limiter
- This block will convert 25 round Tippman Arms M4-22 .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
-Installs at the base of the magazne and allows you to use all factory parts of the magazine.
$6.59 As low as: $6.30 -
ETS Glock 21 10/30 Magblock (.45)
ETS Glock .45 Magblock 10 Round Limiter for 40 round Magazines
This Magblock fits the ETS 30 round .45 magazines for Glocks and will limit them to 10 rounds. Easily installed under the follower of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately).
- Simple install to make 10/30 Glock .45 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.$7.49 As low as: $6.49 -
ETS Glock 18 10/40 Magblock (9mm)
ETS Glock 9mm Magblock 10 Round Limiter for 40 round Magazines
This Magblock fits the ETS 40 round 9mm magazines for Glocks and will limit them to 10 rounds. Easily installed under the follower of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately).
- Simple install to make 10/40 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.-This magazine fits all Glock double stack 9mm firearms.
$7.49 As low as: $6.49 -
GSG AK-47.22LR 10/24 Magblock (.22LR)
GSG AK-47 .22LR 10/24 Magblock 10 and 15 Round Limiter
- This block will convert 22 round GSG .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
-Installs at the base of the magazne.
$6.49 As low as: $5.95 -
Shadow Systems DR920, XR920 Magblock 10/17 (9mm)
Magblock 10 Round Limiter for Shadow Systems DR920 Pmag 17 GL9 Magazines.
- Fits 17 round Magpul Pmag GL9 magazines for Shadow Systems DR920
- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits Magpul Pmag 17 GL9 Magazines Only.
$6.59 As low as: $5.95 -
Beretta APX Magblock 10/15 (9mm)
Beretta APX Magblock 10/15 (9mm) 10 Round Limiter
This Magblock fits the factory Beretta APX 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/15 Beretta APX magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX magazines as seen in the photos. Other types of magazines will likely require modification of the limiter.*Please click on photos for installation instructions.
*Universal Limiter Instructions: Cut to #14 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #14 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
Beretta APX Tactical Magblock 10/18 (.40)
Beretta APX Magblock 10/18 (.40) 10 Round Limiter
This Magblock fits the factory Beretta APX 18 round .40 magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/18 Beretta APX magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX magazines as seen in the photos. Other types of magazines will likely require modification of the limiter.*Please click on photos for installation instructions.
*Universal Limiter Instructions: Cut to #20 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #20 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
Beretta 92 Magblock 10/30 (9mm)
Beretta 92 Magblock 10/30 (9mm) 10 Round Limiter
This Magblock fits the factory Beretta 92 30 round 9mm magazines and will limit them to 10 rounds. Easily installed under the follower. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/30 Beretta 92 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter.*Please click on photos for installation instructions.
$7.49 As low as: $6.49 -
Kalashnikov USA KR-9, KR-9 SBR, KP-9 10/30 Magblock (9mm)
Magblock 10 Round Limiter for Kalashnikov USA 9mm 30 Round magazine
- This block fits the new Kalashnikov USA 9mm magazines and will convert them to hold 10 rounds.
-Installs right under the follower and is held in place by spring tension.
- Made of super strong heat resistant polymer.
-This block is compatiable with the KR-9, KP-9 and KR-9 SBR magazines.
$6.95 As low as: $5.50