Shopping Cart - $0.00

You have no items in your shopping cart.

 

Search results for '.308'

Set Ascending Direction

Grid List

per page
Page:
  1. 1
  2. 2
  1. Easily installed inside the spring and replaces the original locking plate.

    VEPR .308 Magblock 5, 10, and 15 Round Limiters

    Magblock for Vepr .308 20 Round Magazines.  5, 10 and 15 Round Limiters.

    Fits Vepr .308/7.62x51mm 20 round magazines made by Csspecs>

    - Easy to install in seconds.
    - Replaces the original locking plate.
    - No external magazine modifications.
    - Select 5, 10 or 15 round limiter below. 

    - Tested in Vepr magazines made by Csspecs. May fit other manufacturers with or without modification.
  2. Magblock 10 Round Limiter for ProMag DPMS LR-308. Easy to install. The spring fits into the hole in the block to prevent movement and noise.

    ProMag DPMS LR-308 Magblock 10 and 15 Round Limiters

    Magblock for ProMag DPMS LR-308 20 Round Magazines.  10 or 15 Round Limiters available.
    Fits Promag DPMS LR-308 20 round magazines in .308/7.62x51mm and will convert them to hold only 10 or 15 rounds.

    - Easy to install in seconds.
    - No need to drill any holes.
    - Load magazines on a closed bolt in most rifles.
    - No external magazine modifications.

  3. 15 Round Limiter for ArmaLite 25 Round Magazine

    AR10 ArmaLite Magblock (.308) 10/25 and 15/25 Limiter

    Magblock for ArmaLite AR10 25 Round Magazines.  10 and 15 Round Limiters.

    Fits ArmaLite AR10  .308/7.62x51mm 25 round magazines and will convert them to hold only 10 or 15 rounds.

    - Easy to install in seconds.
    - No need to drill any holes.
    - Load magazines on a closed bolt in most rifles.
    - No external magazine modifications.
    - Select 10 or 15 round limiter below. 

  4. Zastava Arms PAP M77 10_20 Magblock (.308)

    Zastava Arms PAP M77 .308 Magblock 5, 10, and 15 Round Limiters

    Magblock for Zastava Arms PAP M77 .308 20 Round Magazines.  5, 10 and 15 Round Limiters.

    Fits Zastava M77 .308/7.62x51mm 20 round magazines made by Zastava Arms.

    - Easy to install in seconds.
    - Allows the use of the stock locking plate.
    - No external magazine modifications.
    - Select 5, 10 or 15 round limiter below. 

    - Tested in Zastava Arms M77 PAP magazines made by Zastava. 

  5. MAGPUL Original Mag Assist .308 Black

    MAGPUL Original Mag Assist .308 Black

    When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes.

    - Durable synthetic rubber loop with recessed rough gripping surface.

    - Quick and easy installation and removal.

    - Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide.

    $3.59
  6. CETME 10/20 .308/7.62x51 custom block

    CETME 10/20 Magblock (.308)

    CETME 10/20 Magblock 

    Fits CETME Military Surplus Magazines in .308/7.62x51mm 20 round magazines and will convert them to hold only 10 rounds.

     - No need to drill any holes. 

     - Load magazines on a closed bolt.

     - Easy to install. 

    - No external magazine modifications. 

    - May fit other brand AR 10 Magazines. 

  7. Lancer_L7_5_10 Round Magblock (Hunting)  5 Round Limiter for 10 Round Magazine for Hunting

    Lancer L7 5/10 Magblock (.308)

    Lancer L7 5/10 Limiter for 10 round magazines in .308/7.62x51mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 10 round magazine to hold only 5 rounds for hunting.
    - Only fits L7 Advanced Warfighter with slide on base as shown.
    - Does not affect reliability.
    - No increase in spring pressure or wear. 
    Note: This is a custom modified Pmag block and will replace the original base. 

  8. LANCER L7 10_25 BLOCK

    Lancer L7 10/25 Magblock (.308)

    Lancer L7 10/25 Limiter for 25 round magazines in .308/7.62x51mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 25 round magazine to hold only 10 rounds.
    - Only fits L7 Advanced Warfighter with slide on base as shown.
    - Does not affect reliability.
    - No increase in spring pressure or wear. 
    Note: This is a custom modified Pmag block and will replace the original base. 

  9. Lancer L7 10 round limiter for 20 round magazines.

    Lancer L7 10/20 Magblock (.308)

    Lancer L7 10/20 Limiter for 20 round magazines in .308/7.62x51mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.
    - Only fits L7 Advanced Warfighter with slide on base as shown.
    - Does not affect reliability.
    - No increase in spring pressure or wear. 
    Note: This is a custom modified Pmag block and will replace the original base. 

  10. Same as M14 M1A Block shown installed in LaRue magazine.

    LaRue Tactical 10/20 Magblock (.308)

    Magblock for the LaRue Tactical 20 round AR-10 Magazines. Made of heat and impact resistant fiber reinforced polymer. Won't deform even in the most hostile environments. This is the same as the M14 Limiter. Will be a tight fit in the base. Thanks to EBR Works for this compatibility update. Check them out at for compliance work:  http://www.ebrwebstore.com/middleman-ffl-services

  11. Duramag AR-10_10_20 (762x51) This is a custom M14 block

    Duramag AR-10 Magblock 10/20 (.308)

    Magblock for the Duramag/C-Products 20 round AR-10 Magazines. Made of heat and impact resistant fiber reinforced polymer. Won't deform even in the most hostile environments. 

  12. SGM Tactical Saiga (.308762x51)_10_15 (UAK-20+TC) This block is for the .308 win 15-round magazines only

    SGM Tactical Saiga Magblock 10/15 (.308)

    SGM Tactical Saiga 7.62 x 51 mm 10/15 Magblock

    - Converts the SGM Tactical Saiga polymer 7.62 x 51 mm 15 round magazine to 10 rounds.

    - This block fits the 15 round SGM Tactical Saiga Magazines. (May fit others, but not tested at this time)

    - This block will replace the original magazine locking plate.

  13. PMAG LR10 .308 5 Round Limiter

    Pmag LR 10 Magblock 5/10 (.308) Gen M3 (5 Round)

    Pmag LR10 Magblock GEN M3 Magazine Capacity Limiters (5 Round for Hunting)

    Fits the Magpul LR10 .308/7.62x51mm 10 round Pmags and will convert them to hold only 5 rounds for hunting. 

    - Will NOT fit older version magazines. Gen M3 Only.

    - Load magazines on a closed bolt in most rifles.

    - Easy to install. New style block allows you to use the stock locking plate.

    - No external magazine modifications.

  14. LANCER L7 (Hunting) 5_20 Block is designed for hunting.

    Lancer L7 5/20 Magblock (Hunting) (.308)

    Lancer L7 5/20 Limiter for 20 round magazines in .308/7.62x51mm.

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 5 rounds for hunting.
    - Only fits L7 Advanced Warfighter with slide on base as shown.
    - Does not affect reliability.
    - No increase in spring pressure or wear. 
    Note: This is a custom modified Pmag block and will replace the original base. 

  15. Beretta BM-59_5_20 (Hunting)

    Beretta BM-59 Magblock 5/20 (.308) Hunting

    Beretta BM-59 5/20 Magblock .308win/7.62x51 (Hunting)

    Fits Beretta BM-59 Magazines in .308/7.62x51mm 20 round magazines and will convert them to hold only 5 rounds for hunting.

     - No need to drill any holes. 

     - Load magazines on a closed bolt.

     - Easy to install. 

    - No external magazine modifications. 

     

Set Ascending Direction

Grid List

per page
Page:
  1. 1
  2. 2